Recent content by josehf34

Today reinstalled the tranny filled it again and no leaks!!! But now another issue more strange, looks like the tranny is stuck in park because I can't move the rear tires with hand and If i shift into any gear and rev the engine the tires wouldn't turn, I know the pump is working because I...

You mean, these rings? because I didn't touch them

The converter was empty but I put 1 quart on it before installing, I put 4 quartin the tranny before start the engine, once started put it in neutral and then added two additional quarters before I start seeing the leak I hope is the vent hole, the pump has a very tiny crack, like the size of a...

I'm finishing the swap of my 727 for an A518 but now I've a problem. I've to take apart the tranny pump to replace a bad input shaft bushing and also had to replace the input seal, I assembly again the pump and tranny and everything looks fine but as soon as I started the car in neutral there...

A few weeks ago had the car stereo installed, everything works really good, I can listen the car stereo up to 4 hours before the battery starts dying, the unique problem is that I made a mistake while buying the front speakers and now I can't install the dash top metal (the speaker tweeter is...

I think we're talking about different stuff (lol). My '74 has the stereo speakers holes and the center speaker for AM radio in the dash mount structure, but the top panel only has the center speaker, my idea is drill the tiny holes only in the top panel I'm going to take a picture :)

I understood the situation and that's why I'm planning to drill the holes. Murray has one panel with stereo holes for about $110 including shipping but there's a panel on ebay with the center hole for about $55 including shipping so that's why I think is a good idea try to drill the stereo holes...

Looks like you have a really professional car audio install. I'm not really into having a fancy setup just something to listen music with good quality and power, for example I'm planning to run one single amplifier (Kenwood Excelon X801) for subwoofer and rear speakers What you did for stereo...

Well i hope murray has one of those panels, If not I think I'm going to buy the ebay panel I posted and try to open the holes by myself being cleanest as possible

Does it includes the holes for the center speaker? Just send the email to murray b park, hope they have one of those panels

So is there any panel with the holes for those speakers? because mine is exactly like this DASH TOP METAL PANEL - 1974-1978 DODGE PLYMOUTH CHRYSLER C-Body 78CY1-4M6 | eBay if yes maybe is time to talk to murray b park because looks like that panel isn't available on ebay What's the size for...

I suspected those holes were there for speakers but the metal plate doesn't has holes so the speaker will be covered by the metal plate. Does it matters ?

Guys I think is time to install a car stereo in my fury but I need some suggestions. I already have the adapter mount for replace the stock AM radio with a modern single din radio, I've chosen a pair or speakers for the rear, an amplifier and subwoofer but I don't know what to do for the front...

No, I'm not using them because is a really nightmare have the intake installed with those gaskets in place so I'm using RTV I think would be better to check for leaks tomorrow and torque again the intake, when Installed the intake used 40 ft.lb but maybe is time to check again I'm...

A leak like a vacuum leak? Because I've tested with carb cleaner and with cigarrette smoke but didn't found any leak, maybe is time to test again. If could be other kind of leak I'm sure I've a leak in the exhaust somewhere but I haven't paid attention to it, I don't know how can a exhaust leak...