Search results for query: *

Answered in the other post but I run a 12V from the Ballast Resistor run side to the carb. The choke well is left open.

As was mentioned above I ran the electric choke feed from the run side of the ballast to the carb choke. The old thermostat well is left open.

Hello Fred As mentioned above you do not need to run the EGR off the Eddy Carb unless your state requires emission testing in which case that's a whole different conversation I believe. (Being from the free state of Alberta Canada we do not have such regulations lol) The big difference between...

Like I told you on the phone Mark....you suck! :lol:

I have swapped out multiple Lean Burn systems and carbs over the years and the improvements were well worth it. Last one I did was on a 76 NYB with a 440 and we went to an Eddy AVS2 650CFM. Car never ran better however there is a bit of monkeying around with the kickdown linkages to get it...

Growing up in Edmonton during the hey day of SCTV we were loyal watchers of Monster Horror Chiller Theatre. The crew would be seen around town and we actually used the Allard theatre crew to film our commercials.

The A904/A500 pan gasket is P/N 4295875AC. It is used in Dakotas/Jeep XJ's.

@Welder guy Marlow is running Dynomax on his and is quite happy with them once he added resonators so that is my direction I think.

Good intel Grant thanks! It's for the 79 300 with dual exhaust. It has Flowmaster 40's on it now I think but it sounds like it is straight piped. I am thinking of the magnaflow street series version 19303 as stated above. I like @Big_John 's idea as well so I will have to check dimensions.

I am looking for suggestions for my 79 300 exhaust system to reduce the sound and vibration my current "Flow Through" system is causing. As many of you know my wife suffers from a debiltating nerve injury to her leg that reacts terribly to loud noises or vibration which has prevented her from...

The more I look at this tag the more it looks like 3 digit sales codes mashed together and not a 6 digit code for example JSC N01 JSC is a sales code for upgraded gauges JFB is a seat alert CKG is vinyl floor LND is a light package (Clearance lights) LNE is another light package (Roof...

Pretty sure it was sold a little after Bill died by the family. We discussed it being a $40k CDN car at the time. I am sure Bill would be happy to see it bring that kinda money but would understand that it’s priced out of the market especially if the mileage has been tampered with. I also don’t...

Here is what I can tell you Matt that is in the database. Some of it differs from what you found but it is along the same lines I think. NHA - ENGINE OIL COOLER NHB - TRANSMISSION OIL COOLER XDA - LEATHER WRAPPED WHEEL? XDB - REINFORCED BODY STRUCTURE JPE - POWER SEAT 2 WAY MRB - LOWER BODYSIDE...

Derek @CanCritter and I were just discussing this. I know that Sue was trying to sell it after Bill died and a few members here were helping her out. It is definietly Bill's car as mentioned. You can tell from the air cleaner tht Paul put on the car during the restoration. Definitely concerned...

LXCP48 is the model code for a Magnum SXT Q5D1 is the interior code for cloth buckets in graystone YAC is build to Canada Specs EGG is 3.5L HO V6 APA is Monotone Paint

Here is the broadcast sheet Grant. Very interesting it had a fender tag I am going to look for one on my 06 now lol. It was a rental originally then sold to someone in Edmonton.

The low volume paint options are available on the 2024 Ram Heavy Duty trucks but they are not a match to the Challenger or Charger Impact Colours. They are fleet specific colours such as IH RED UPS Brown School Bus Yellow etc. There are a couple of close colours such as Omaha Orange (Hemi...

Meh no worse than -50 below in January with a 70 mph wind and a highway full of dead electric cars.... but again I am here for your words of wisdom so Sebring here we come! Merry Christmas Stan!

Great to see you @Carmine hope all is well with you and your family. Costa Rica has been looking better all the time for us Canucks....

That would work nice with my factory AM/FM/CB radio in my 79 300...... mmmm