Search results for query: *

1- Stuff socks in the tailpipes and breather intake (red or yellow best colors) 2-Remove and store the battery in the basement. 3-Change the oil to prevent sludge forming in the pan from sitting in the cold 4-Check glycol value to -25 minimum 5-Raise the car on blocks under the frame to relieve...

This is usually the case when a valve is not completely closed during ignition on one or more cylinders. As stated above, the timing chain and gears are toast, your distributor timing is off, or you have a sticking valve, broken valve spring or collapsed lifter. None of which are fun to fix. And...

Maybe it's you.

You have a few factors occurring when you first press the pedal, initial resistance being the main factor. The throttle lever down at the tranny could well be one but I think that the attachment point of the trottle cable at the carb is the main culprit, let me explain. Leverage of the carb...

I was really surprised when I read the comments on this forum regarding exhaust resonance and never knew people addressed it this way. You need to read a page or two of the members entries to see how far out this idea is but how well it works. From great minds come great ideas: Exhaust Drone is...

Just hang a Saginaw in place and be done with it!

If you're going for OE colors, your choice is limited. The car is too large for purple and it's deffinitely not a Plum Crazy type of car. If your thinking that route I'd go black. For off Mopar colors take a look at these jewels. I particularly like the green on the AMX and it will go great with...

Mounts are different. But on the up side, a BB in your ride will be a bigger difference from a 318.