For Sale Doors, hub caps, etc

Status
Not open for further replies.

superfragl

Active Member
Joined
Jan 16, 2014
Messages
358
Reaction score
320
Location
MA
Feedback: 0 / 0 / 0
Contact seller
I have a few parts sitting in my shed that I would like to get rid of.
Located in Western MA.
Doors off a 68 Fury III fast top - appear to be in decent shape, original paint. $50 each.
20160828_141152.jpg

20160828_141112.jpg

20160828_141022.jpg


Tail panel
20160828_135343.jpg


Bumpers
Front is straight, rear has a dent. Rusty on the back side. Not even sure on the price...
20160828_134929.jpg

20160828_134945.jpg


Hub caps for Fury III ($35) and Sport Fury ($50)
20160828_140103.jpg

20160828_140451.jpg

20160828_134730.jpg


318 auto radiator $50
20160828_135858.jpg
 
Good price for the doors, i just need the passenger side.. how much would it cost to ship it to Chicago is the real question haha..
 
I'll let you know, question tho, cant tell from the photo, are the window cranks, glass etc in the door? Or is it just the shell?
 
No glass or cranks. I believe the locks and handles are on the door.
live4theking, thanks for the tip on shipping.
Let me know if you want more pictures.
Greyhound can ship it for less than $150 as well.
I will have to weigh the door to get a quote.
 
Well it certainly will weigh less without all the innards/glass..
Let me know when you can. No rush.
 
The quote from Greyhound shows

GPX Standard - 5 to 7 DAYS - Self Service (Station to Station) 1 $107.10
GPX Standard - 5 to 7 DAYS - Semi-Full Service (Station to Door) 1 $154.35

This is an estimate and final cost might be slightly different.
Let me know if you want more info.
 
Sounds good.. i can pick it up at the station. I live about a half hour drive from there.
The cheaper option is best for me as i live on a fixed income.
I'll have funds on or around the 1st of the month if that works for you.
 
My door works but has a huge dent in it that i just don't have the ability to fix.. figured it would be easiest just to replace it.
Hoping its not too difficult to transfer all the innards and glass..
 
That is fine with me. I will take more pictures so you can see details. Give ma a few days.
 
Took a few pictures of the pass. door. See last picture - some rust on the bottom, no holes.
DSCN8405.JPG
DSCN8407.JPG
DSCN8408.JPG
DSCN8410.JPG
DSCN8411.JPG
DSCN8412.JPG
DSCN8413.JPG
 
Cool, i can deal with that spot over the winter.. looks a lot better than the one I have
20160627_183832.jpg
 
That is pretty bad...
If you need anything else to be shipped with the door - let me know (like quarter panel molding, etc)
 
Haha, ya it is.. even the handle is bent..
I have the moulding for the rear quarter, but am missing the door moulding, your door seems to have it tho, so im not too worried about it.
 
I am interested in the front bumper. Where in Mass are you? Thanks John.
 
Status
Not open for further replies.
Back
Top