New profile posts

Currently working on a 1967 Fury III. Planning to stroke a 400 block to 450 cubic inches. Could use a little help in the body area if anyone has done rear quarter panel repair or has a hood they would want to part with.
Hi Craig,
If the Super Suspension Deal is still available, I'll buy it. This is for a 67 Imperial Crown 4DHTP.
Stephen
M
mobileparts
You need to call to swoop in and beat the " hemmers and hawers : 516 - 485 - 1935... New York // Eastern Time...
6 A.M. to 4 P.M. your time // 9 A.M. to 7:00 P.M. Eastern Time --- 1 DEAL remaining, period..... Craig.....
1967 Newport Convertible. Currently stripped bare including front sub frame removed.
Next step: Mounting on the rotisserie, send out for blasting and then redo the previous rust repairs. They pop riveted metal over the holes and then coated everything with a thick layer of under coating to hide their sins.
Hi Maxwell,

It looks like you sold a 2898070 18398 radiator in May of 2016. By chance do you recall if you found a replacement for it? I have the same radiator and am looking for a replacement. Most of the ones I find don't have the full core width (about 2.25 inches) and weigh 10 pounds less.

Thanks
Wyatt, I'm looking for a good link that has info on dash board removal. Do you know of one?
Hey David, do you have a good link I can read up on dashboard removal?
david hill
david hill
John currently in Danville In. Have the info you need at home via MOTORS manual. Will contact you this evening.
John Kelly
John Kelly
OK, Thanks.
KYB wont show an application for these years so you have to use the part numbers.
I'll have to look through my records to get the numbers.
As I've mentioned before go to the Forwardlook.net for help you might get the info quicker but I do have the part numbers just not handy right now.

I will post the part numbers on the forum and once you have the numbers you should be able to find them easily.
My father passed away a week a go today My family were all there to say we loved him and good bye. No I do not plan to sell my '61 I talked to Ted Stephens and he recommended a mechanic to help me change the oil and keep it maintained . I will supply my own oil and filter so I will know what is going in the engine
I like Dirt bikes, Cars, Guns. I have an Auto Repair Shop. Also an FFL/07 gun dealer and like to play with Machineguns. I have about 25 vehicles. 60 DeSoto Adventurer HDTP, 383 Ramcharge (one of 93 made). 57 DeSoto Adventurer 345 Hemi (one of 1650 made). 70 Challenger R/T SE. 70 Dodge W500, 440, factory 6:80 gears. 69 Cougar XR7, 351w 4 BBL. 72 Honda 600 Coupe. 84 Subaru Turbo 4x4 Coupe.
I am a former A body owner, never had a C body. I am here because I have a very nice 70 New Yorker grille and headlight buckets that I am tired of keeping around until I find a New Yorker. No reasonable offer refused.
grille9.jpg
buckets1.jpg



grille2.jpg
Just curious... Where did you find your Build Sheet on your 67 'Yorker? I have yet to locate mine.
The convertible top is powered by transmission fluid, don't ask me how I know this LOL. It's all apart now, let's see how the new parts fit!
69 300 parts here:

www.arizonaparts.com

for a YEAR search put in:

1969 300

1969 Chrysler

1969-70 Chrysler

1969-71 Chrysler

etc. use other year ranges also

300

C Body

C,Y (C= Chrysler Y= Imperial)

P,D,C (C= Chrysler)
M
moper
Thanks but I’m looking for stuff closer to me so I can drive and inspect it when I pick it up.
marty mopar
marty mopar
Hell you are only about 650 hours of driving from me!

well good luck finding something within driving distance

FYI in the 1980s I owned a 69 300 convertible, 440, yellow with a white interior so have lots of parts for it still. The diecast stuff is from AZ so no pitting.
marty mopar
marty mopar
Hi Craig,

67 Chrysler 300 convertible. new to the forum.
It appears your a SME on mopar brakes drums etc and May have nos or OEM parts?
If you have front left and right drums w hubs and studs already swaged in I’m interested in purchasing
Ty
Cam
Back
Top