69fury side molding

69mopar man

Member
Joined
Aug 17, 2011
Messages
67
Reaction score
29
Location
Michigan
Does anyone know where I can get the side molding with the black stick on vinyl or plastic that goes on the molding for a 69 fury? Also are there any c body members that live near coopersville Michigan that could help me with my 69 fury project car , thanks again , I’m making some headway on my fury, new brakes with the OE asbestos shoes, rebuilt carb, deburred and sanded and painted leaf springs and diff, and frame , degreased motor and under belly , painted front suspension , still have to replace all bushings from old age that 53 years will cause , once I rebuilt carb after 5 minutes the tapping noise went away:) :) thank god, today I put tires back on and buff the car with rubbing compound to get 50 years of stains off and get her shinning again, if your real quite , one can hear her asking to go for a run,!!! Can’t wait

F69FD883-40A3-4038-AFE7-37E92FB75CC7.jpeg
 
I have heard of fellas that can tap that out if it is not too far gone and at least make it look presentable if not great. Congrats on your 69 and I understand the appeal of that year. I have one myself. Dematt may know of someone in Michigan that does that sort of stuff.
 
Looking for both front fender mounding for sure but would buy entire molding if available , I can find molding but nobody knows anything about the black trim that sticks to lower half of mounding that is in the car and that I would like to find, thanks also would looking for no’s headlights, wide flute GE 4001,4002 high and low beam, thanks

61991845-64EB-401D-8D5B-AD70DDB05B67.jpeg
 
Back
Top