WANTED 1966/65 Chrysler ignition bezel nut

Status
Not open for further replies.
F

fullsized

Member
Joined
Dec 21, 2010
Messages
83
Reaction score
60
Location
Vidalia , Georgia
Feedback: 0 / 0 / 0
Contact seller
Last owner was looking for why the engine did not crank. New relay/starter/ignition switch later and now I have it. Need the retaining nut (chrome) for the ignition switch. I have a bezel coming but the nut will be needed. In Georgia. PS it turned out the problem is with the neutral switch. Cranks fine now. Thanks for looking. fullsize
 
From the web? I have a few different ones.
 
Last edited:
halifaxhops said:
From the web? I have a few different ones.
Click to expand...
I found one on ebay with the rest if the ignition bezel and switch. It fits 65 and 66 only (Chrysler only). It has a shallow shoulder on it and 4 radial slots for the key hole light. and four notches for the tool to remove it.
1735051717491.png
1735051755888.png
You can see two slots for the light and how shallow the "lip" is.
 
Here's a switch i took out of a 65. The retainer nut is shallower and only has 2 slots.
20241224_081248.jpg
20241224_081302.jpg
 
I don't really want to separate the correct retainer from the switch but I'll sell the complete switch and 2 keys and both retainers for $25 shipped.
 
Hold on a minute, I still have the dash out of the 65. Let me see if the 2 slot retainer will work.
 
Status
Not open for further replies.

Similar threads

Vinny
  • Locked
WANTED Police A/C Cut Off Switch and Bezel
Replies
15
Views
2K
Vinny
Vinny
Turbo301
No start, and then no NOTHIN'
Replies
12
Views
2K
Vinny
Vinny
timthomas
Ignition switch bad?
2
Replies
22
Views
5K
JimmyRich
JimmyRich
F
  • Locked
For Sale 1966 Chrysler Newport Convertible For Sale
Replies
0
Views
2K
FrancoFonseca
F
Derail77
  • Locked
WANTED Wanted 65-68 single power window switch.
Replies
2
Views
969
Devinism
Devinism
Back
Top