The SAGA Begins - '66 300 Convertible

Wollfen said:
I was waiting to see a pic of the bracket to see if i had one for you.
Click to expand...

Gary: Yesterday, I made an attempt to remove the existing 383 bracket from the A/C pump, so I could at least post a picture of the bracket. Should be easy. Huh? Nooo. . . The bracket is attached to the pump with long bolts that insert from the front of the pump from behind the clutch / hub assembly. To remove the clutch / hub, a C-3787 puller is required, which of course I don't have. Nothing that should be easy is easy. . . I shall continue to endeavor to persevere. . .
 
Ripinator said:
Gary: Yesterday, I made an attempt to remove the existing 383 bracket from the A/C pump, so I could at least post a picture of the bracket. Should be easy. Huh? Nooo. . . The bracket is attached to the pump with long bolts that insert from the front of the pump from behind the clutch / hub assembly. To remove the clutch / hub, a C-3787 puller is required, which of course I don't have. Nothing that should be easy is easy. . . I shall continue to endeavor to persevere. . .
Click to expand...
Pic's of this process????
 
I just looked at the map to see where Germantown is, when we come down to see the wife's sister next time I may have to stop and see this ride in person. She lives in Annapolis
 
65sporty said:
I just looked at the map to see where Germantown is, when we come down to see the wife's sister next time I may have to stop and see this ride in person. She lives in Annapolis
Click to expand...

You are welcome any time. Just let me know when yer coming.

The Garage Mahal is located a short distance off I-70 near Frederick, MD.
 
You most likely will not need that tool. I usually spin the nut off with impact (easier than trying to hold it). Then just tap lightly around the rear of the clutch perpendicular to the shaft. They have a taper on the shaft which will allow it to just pop right off.
Good luck.
 
Ripinator said:
Gary: Yesterday, I made an attempt to remove the existing 383 bracket from the A/C pump, so I could at least post a picture of the bracket. Should be easy. Huh? Nooo. . . The bracket is attached to the pump with long bolts that insert from the front of the pump from behind the clutch / hub assembly. To remove the clutch / hub, a C-3787 puller is required, which of course I don't have. Nothing that should be easy is easy. . . I shall continue to endeavor to persevere. . .
Click to expand...
Think Sanden....
 
Ripinator said:
Gary: Yesterday, I made an attempt to remove the existing 383 bracket from the A/C pump, so I could at least post a picture of the bracket. Should be easy. Huh? Nooo. . . The bracket is attached to the pump with long bolts that insert from the front of the pump from behind the clutch / hub assembly. To remove the clutch / hub, a C-3787 puller is required, which of course I don't have. Nothing that should be easy is easy. . . I shall continue to endeavor to persevere. . .
Click to expand...
You should be able to rent a suitable tool from the parts store... or break your foot Dave's way...
 
You must log in or register to reply here.

Similar threads

S
  • Locked
WANTED installer for '63 Chrysler 300 windshield in San Jose, CA area
Replies
10
Views
1K
1970FuryConv
1970FuryConv
R
C Body fan from long ago
Replies
17
Views
3K
polaraman66
P
ayilar
Poppy, my first C-body
2 3 4
Replies
69
Views
8K
Samplingman
Samplingman
J
  • Locked
For Sale 1970 Chrysler 300 Convertible T-code 440 Engine Largely Complete, with 727 Trans
Replies
8
Views
3K
Jer
J
fury fan
NOT MINE EBAY 67 Sport Fury convertible, blue-blue, 'I feel that my price of $9,500 is very realistic '
Replies
14
Views
2K
cbarge
cbarge
Back
Top