Old stuff you still use.

my vcr quit working recently. hitachi bought in 1992 as a factory refurb. not sure what to do with it. i tried the usual cleaning of the capstan and pinch rollers with a q-tip and rubbing alcohol. no picture, just a blue screen.
hitachivhsvcrmodelvt-1100a_1.jpg

clock radio quit too. ge with the flip numbers. just hums. radio still works though.
il_fullxfull.168531292.jpg
 
If ya love 'em and you're willing to spend the money, find the old grey-beard radio electronics repair guys. There's usually one or two in any particular area, and are best found by talking to the local antique radio club, and most of them can fix just about anything.
 
IMG_3139.jpg


Been getting into woodworking recently. Not sure how old this sucker is, but I'll bet it precedes me! (Thats not saying much yet)
 
I don't have any pic's of them, but I have quite a few vintage Craftsman tools from my Grandpa. I also have some other old socket sets. How many of you have Cornwell tools? I have some sockets, ratchets and extensions from Grandpa also. The thing I love the most about these tools is I always think about him whenever I use them.
 
1965 Bolens 1000. I repowered it with a Honda GX340. It mows, rototills, and plows snow here.

20180529_170736.jpg
 
Found this Hamilton Beach/Scoville milkshake mixer at a thrift shop in February for 8 bucks, couldn't resist. What started as a thorough cleaning turned into a complete disassembly. The weather is just starting to get nice, so I have only made a couple as of yet. I'm sure I'll get some use out of it in time.
IMG_20190513_205239.jpg
IMG_20190124_224906.jpg
IMG_20190128_214823.jpg
 
That reminded me, I bought this Sunbeam toaster twenty years ago at a garage sale. I've since found a couple others in better condition, however until this one gives up the ghost, or I get married, it will be making toast.View attachment 286022

I still have mine - best toaster EVER!! My wife is scared to use it as it's so old, but it still works!
 
Very nice - impressive gear, far better than mine. Especially the Grado - mine is entry level decent stuff, flexible with EQ etc, and where the real flexibility comes in is with the two turntables and multiple cartridges etc... the good thing about my system is as a record producer, after dealing with and listening to super high-def sound with $25,000 speakers and amps in near silent acoustically tuned rooms, the entry level system really can help you recognize fundamental flaws in your recording. If it sounds great on an entry level system, chances are the mix will stand up anywhere.

I have a collection of about 10,000 records, mostly 78s of various descriptions, 16" transcription discs, Edison and Pathe discs. All playable with either my Garrard or Dual turntables - with the Garrard I just switch out the headshell with either the GE VRII, or a couple of Stantons with switchable stylii. Edison and Pathe require reverse wiring because they're vertical cut records instead of lateral. It's remarkable how much difference there is when playing a vintage disc with the CORRECT equipment it was designed to be played on. I can play you an early 50s Ella Fitzgerald record on my Dual with the Ortophon, and it will sound really good, but then I play it on the Garrard with the 1952 GE VRII coarse groove stylus, and it literally JUMPS out of the system with all the life and punch one would expect from some sort of high end dynamic range expander.

The Brunswick Gramaphone plays all 3 types (Lateral, Edison or Pathe) with a rotating reproducer/stylus assembly that's really cool.

Yes, if your Wharfdales are rated at 150 watts RMS, then you really need 1,000 to 1,500 watts to do them justice - not to have volume, but dynamic range headroom. Have you had to replace the butyl rubber support rings on the edges of your speakers yet? Mine disintegrated about 10 years ago, and I had to get new ones.

I have an ace in the hole tucked away awaiting refurb - a 1959 Fischer 800-C receiver - top of the line for the day, and cost nearly as much as an entry level new car back then (interestingly, so did the Brunswick Ultona Gramaphone). The Fisher 800-C was one of the best they ever made, still covetted to this day by audiophiles, and known collectively as "The Fisher". RIAA curve switches, Frequency contouring for tuning to your listening room/speakers, polarity reverse switches, phono input impedance switches, radio frequency fine tuning rejection switches etc. Lots of flexibility, and a true honest high power rating (compared to today's out and out RMS power fibs from specs today), all done with gorgeous warm tube technology. It will be my mid level listening system once I get it going.
View attachment 285921

Holy crap man! You are beyond an audiophile! Also quite obviously an accomplished musician. Cheers to that, and for your contributions! All of my speakers are original, fingers crossed. The prairies are kind to speakers as long as they aren't in a damp basement, other than the dust. Not to much in the way of humidity fluctuations. Of course there are many other variables.
 
I don't have any pic's of them, but I have quite a few vintage Craftsman tools from my Grandpa. I also have some other old socket sets. How many of you have Cornwell tools? I have some sockets, ratchets and extensions from Grandpa also. The thing I love the most about these tools is I always think about him whenever I use them.
I have never been on a Cornwell truck. In my whole career I never was in a place that had service. I see a truck now making regular visits to a local dealer, and all I can think is "those poor suckers are going to be bummed out when they move and can't find anyone to service their warranties".
 
Back
Top