WANTED 69-73 Prop Valve

Status
Not open for further replies.
Hi, looking for a 69-73 prop valve. Its the last piece to the puzzle for my disc swap. Anyone have one or know where I can find one? Thanks!!

Mopar did not use a proportioning valve on their stock disc systems at that year range. (Not to be confused with the brake warning/distribution block under the master cylinder on some models) There is a metering valve at the left right brake split at the front cross member. The metering valve was adjustable and performed the same function to balance the brakes. You can try a web search to see if anyone has one of the stock units if you are trying to keep a stock appearance. Otherwise, there are numerous vendors that sell universal proportioning valves. www.manciniracing.com has them for sure.

Dave
 
Last edited:
Mopar did not use a proportioning valve on their stock disc systems at that year range. (Not to be confused with the brake warning/distribution block under the master cylinder on some models) There is a metering valve at the left right brake split at the front cross member. The metering valve was adjustable and performed the same function to balance the brakes. You can try a web search to see if anyone has one of the stock units if you are trying to keep a stock appearance. Otherwise, there are numerous vendors that sell universal proportioning valves. www.manciniracing.com has them for sure.

Dave
Thank you Dave!
 
Here is the metering valve I have.
DSC04848.JPG
 
That is not a metering valve. That is a brake warning light assembly. If you are going to do a disc brake conversion, you will need to keep this type valve. See yesterday's post by moparsteve, the metering valve is on the frame fail at the L/R brake line split.

Dave
 
That is not a metering valve. That is a brake warning light assembly. If you are going to do a disc brake conversion, you will need to keep this type valve. See yesterday's post by moparsteve, the metering valve is on the frame fail at the L/R brake line split.

Dave






That is exactly where this unit was mounted.
 
Status
Not open for further replies.
Back
Top