413's Recent Activity

  1. 413 replied to the thread Prime oil pump..

    Slide a space heater under the pan and warm up the oil for 20 minutes. You have to run it more than a few seconds, give it 15 seconds.

    May 25, 2020 at 1:02 PM
  2. 413 attached a file to the thread Rear Axle Bearing Noise.

    Just clean them out completely so they are shiny steel with no grease. If they roll smooth repack them. Use a needle on the grease gun....

    F1A88972-510C-4BD8-A2A2-10B37A5E1823.jpeg 2B6E38F9-456C-425E-8054-ADBED658274F.jpeg B88EFD51-8CD2-4C07-9866-08F6DAA62FD4.jpeg C77998B4-2296-4DBD-B920-C52017C731FB.jpeg 2F45D31E-3288-48B6-9AB9-E4090A4E4C0B.jpeg May 24, 2020 at 5:37 PM
  3. 413 replied to the thread 389/4-Speed Driver! 1965 Pontiac Grand Prix.

    Price looks fine from here, accepting offers. Nice car. Read the description again.

    May 23, 2020 at 10:46 AM
  4. 413 replied to the thread Wyatt’s Hot Rod build.

    Dumb question #1 Why wouldn’t you start with the bigger version of an AVS (440 magnum carb) if you are massaging more CFM out of this...

    May 22, 2020 at 11:11 AM
  5. 413 replied to the thread Prime oil pump..

    Remove distributor Remove oil pump drive shaft 5/16” hex rod in drill put it down the hole until it goes into the gear. Turn on drill...

    May 20, 2020 at 6:32 PM
  6. 413 replied to the thread fixing up my 70 NEWPORT need help with sourcing parts?.

    You are miles ahead with points, pun intended! Just maintain them, lube the cam, etc. I’ve been walking too many times with...

    May 20, 2020 at 5:12 PM
  7. 413 replied to the thread Aye Aye Captain!.

    Unless they get another foot of water.

    May 19, 2020 at 10:41 PM
  8. 413 replied to the thread Aye Aye Captain!.

    Is that a gator? Looks the part right now.

    May 19, 2020 at 9:55 PM
  9. 413 replied to the thread Wheel torque specs.

    I was posting while you were typing. Glad you got what you need. what or who is NTB?

    May 19, 2020 at 1:33 PM
  10. 413 attached a file to the thread Wheel torque specs.

    From FSM section 22 wheels bearings tires. Wheel stud torque B and C body 65 ft lbs. [ATTACH] [ATTACH]

    761E7DA6-2D66-489A-A929-737949F8F0DC.jpeg May 19, 2020 at 1:14 PM
  11. 413 replied to the thread 1970 440 Choke Cup Gasket.

    Try touching one and see how hot it is. It burns the paint off the manifold there. Make your own gasket. without a gasket the choke...

    May 19, 2020 at 11:22 AM
  12. 413 replied to the thread Painting the air cleaner.

    They were gloss black originally. If you find a survivor you can see the gloss. When they get scrubbed and treated rough the gloss...

    May 18, 2020