Recent content by mcrivelli1898

I have a 1968 Plymouth Fury with a completely totaled out back half that I've decided to pull the drive train from. I'm installing a freshly rebuilt 727 with a reverse manual valve body and 383 that has only 35k on it into my 1992 Dodge Pickup 2wd. I'm also installing the Hughes Whiplash cam...

Im going to attempt it this coming week. From what I have read it looks like you just take a punch to take out the old one and then bolt in the new one through the four holes in the back. After I install it I can post some pictures and let the forum know if the over running clutch solved my...

I pulled apart the sprang and my finding are in the pictures below. Its harder to tell in the picture but some of the teeth on the spring retainer seem to have become misaligned. Also some of the springs have become distorted.

I have a 1968 Plymouth Fury 3 with a 383 and 727. The car has sat for the last twenty years until I purchased it. I had the car running great and have driven it a few hundred miles so far. The car has only 34xxx original miles, and I have replaced the transmission filter and pan gasket on the...

1968 Plymouth Fury 3 Commando 1992 Dodge D150 Location: Michigan