Recent content by Shine Runner

  1. S

    67 440 oil sump and engine mounts?

    My engine sits back further than a factory BB car does, I do not have the room to lift the engine up enough to pull the pan out. I have less than an inch until my bell housing hits the trans tunnel and I need more than that for the oil pan to clear the X-member.
  2. S

    67 440 oil sump and engine mounts?

    does anyone offer a stock style pan with this concave? I have a 7qt pan on my 67 440 and yes, my idler arm is hitting it. So my choices are to either find a stock style pan or cut/weld a recess into my existing pan. which both ways require me to pull the engine to correct.
  3. S

    Does anyone here have a 440 powered 66 Fury?

    I have a 67 Fury III with a 440. Was a 318 car but didn't run. Acquired the 440 and dove right in without doing any research...that was dumb on my part. From the word go, I had fitment issues. The engine/ trans bolted up in the factory small block locations, but the engine was so close to the...
  4. S

    New member, Hello from PA.

    Thanks. I prob have as much time in the hood scoop as I do the entire car. It was a 6 pack scoop my neighbor had on his Coronet. I prob could have bolted it on the way it was but I didn't like the thin body line on the scoop against the factory hood body line. I ended up taking the section of...
  5. S

    New member, Hello from PA.

    Thanks everyone for the welcomes to the site. It is a great place for a lot of information and some equally great people. I have more photos than this but have yet to upload them to my laptop. I will add more in the near future like these and possibly some of them before, while I was doing the...
  6. The Shine Runner

    The Shine Runner

  7. S

    New member, Hello from PA.

    Hi, my name is Ben. I live in a small city in Pennsylvania. I work in a body shop for tractor trailers. My hobbies are all automotive related. I have two Dodge diesel trucks, a Chrysler Cirrus, and my play toy, my 1967 Plymouth Fury III. I just recently just finished repainting it a few weeks...
Back
Top