For Sale Scrapping two 68 new yorkers

[Old 66 Yorker]

So I've got a chance at two cars, both are going to scrap so I'm trying to get picker rights before they do. One is rather complete and I'm keeping the drive line. The other is much rougher. Looks like there is a lot of trim and bits still on them tho...

So. I'll throw this out to the team. Lmk what small bits you are looking for, if I can get them I will. Cover the shipping and a bit of pop money and I'll send stuff. Be a shame to see good OEM go flat.

This is intended for all members that need hard to finds for their own cars and not resellers.

 

[EurekaSevven]

Would you happen to have this interior trim piece that goes under the steering wheel? Missing mine.

 

[Old 66 Yorker]

I'll be back to them in 3 days, I'll look..if they are there I will pull them

 

[FredNY66]

In the unlikely eventuality they are equipped with the Sentinel system, I wouldn't mind the light sensor on the dash, or at least the small cap on top of it (picture is a '66, but it looks the same).

 

[Old 66 Yorker]

Will look, not sure I saw it there or not.

 

[Gavin Jeffrey]

Hi,
I need the drivers door stainless trim, the piece that has the fine ribbed horizontal lines, as per the one in my picture with arrow marked to it.
I need one that is strait and no dents, mine has some minor dents.
Also need the plastic clips that hold it to the door if available.
Please let me know what you have and the condition.
Thank for your help.

Gavin.

 

[Old 66 Yorker]

I know that trim is all there, will check on condition. I know some of it was reinforced with sheet metal screws...but we can hope.

 

[Old 66 Yorker]

I will be going out Saturday to salvage everytgy that can be gotten from the worse car, the other one is getting delivered to my shop.

 

[69CoronetRT]

Id take the fender tags, broadcast sheets, window sticker or another other factory documents (check the glove box) Or please take pictures of the tags.

 

[JJ440]

I am interested as well. Would be able to come over and help pulling some of the parts.

 

[WissaMan]

2 door or 4 doors? what kind of seating arrangement, bench or bucket? do either of them have the 5-speaker stereo radio? How are the dash pads?

I could use some of the emblems.

 

[Old 66 Yorker]

Both are 4 door, one is post other is no post

 

[Ghostultramarine]

What colour is the interior?

 

[Old 66 Yorker]

Car with interior is blue and blue

 

[Ghostultramarine]

I’m looking for the trim piece under the steering wheel too, but I need the dark red (burgundy?) colour.

Perhaps there is a glove box liner? A fan switch (non A/c)? A dash light cover and switch (above the radio)?

It’s for my 1968 Newport convertible.

If the parts are the same?

I have pictures.

 

[LocuMob]

I'll take the proportioning valves if they are for a drum/drum car.

 

[Old 66 Yorker]

Post a pic up ghost and I'll look

Brakes are drum drum but all the brake bits are spoken for.

 

[Ghostultramarine]

Here is one of the light area and the missing fan switch area.

 

[Ghostultramarine]

 

[Old 66 Yorker]

I'll look.

Folks make sure your thread update notifications are turned on, I'll be there Saturday morning and I'll be posting pics and pulling parts, probably asking questions on how to rip some stuff off fast without damaging too..))

One car I have to handle on site in the bush but the second will be at my shop so a bit less stress ))