traintech55
Senior Member
From your pictures you will need the mounting bracket, and the connecting arm. Your Welcome.
Help with 727 Kickdown Lever
- Thread starter badvs3vil
- Start date
- Joined
- Nov 14, 2010
- Messages
- 27,930
- Reaction score
- 26,864
Unless that extension stand with the cable clamp is a bolt on.
traintech55
Senior Member
Good catch. It looked like it was all welded when I first saw it. Now lets hope the car did not start out as a 2 bbl.
badvs3vil
Active Member
According to the car codes, it was a 2bbl from factory.
traintech55
Senior Member
The mount for a 2bbl, is different than the one for a 4bbl. The 4bbl carb sit more toward the front of the engine. You would be better off getting a complete 4bbl system from Detmatt.
badvs3vil
Active Member
Even though I have a 4bbl on it right now and it runs fine?
traintech55
Senior Member
I am talking about the throttle linkage. A 2bbl throttle linkage sits in a different location than a 4 bbl.
badvs3vil
Active Member
Ill have to check it out once I dig into it.
RagTop66
Active Member
I used the summit throttle and kickdown cable kit, which looks a lot like the Amazon one that was linked. It worked fine, but took a lot of adjusting
badvs3vil
Active Member
Do you happen to have a link for it?
RagTop66
Active Member
Check out this page from Summit Racing Lokar 03-0037 Summit Racing® Throttle Cable and Kickdown Cable Pro Packs | Summit Racing
badvs3vil
Active Member
Done and Done!
Got the new Intake installed, had to fix the kickdown lever and the mounting bracket needed to be widen a bit.... But man does this thing have some power now! Also now that I understand how the kickdown and throttle works, I order the Lokar one with the bracket. I will install that later.
Got the new Intake installed, had to fix the kickdown lever and the mounting bracket needed to be widen a bit.... But man does this thing have some power now! Also now that I understand how the kickdown and throttle works, I order the Lokar one with the bracket. I will install that later.
badvs3vil
Active Member
Oh also here is what the inside looked like for anyone smarter then I, I assume it all looks fine?
RagTop66
Active Member
Looks nice and clean to me. But then again, this is what my motor looked like after I tore it down to rebuild shortly after buying the car.
traintech55
Senior Member
Chizzle, chizzle, hot tank, and chizzle.
Stephen Richins
New Member
my nephew got rid of his linkage setup on his dart & replaced it with a cable setup & he said it was way easy to install & adjust I'll try & find out what he used
Stephen Richins
New Member
Lokar : Throttle Cables & Kickdowns
this is what my nephew used he couldn't remember for sure where he got his kit from but thought it was summit or jegs. He said he it was easy to install & adjust. I personally know it does work good as ive driven it since he has installed it. He also said he tried other kick down cable kits & didn't like them
this is what my nephew used he couldn't remember for sure where he got his kit from but thought it was summit or jegs. He said he it was easy to install & adjust. I personally know it does work good as ive driven it since he has installed it. He also said he tried other kick down cable kits & didn't like them
Last edited:
badvs3vil
Active Member
I did finally get everything replaced and set. The kickdown took a bit to get set right, but now its running great!
Below are before and after shots. Thanks everyone!
Below are before and after shots. Thanks everyone!
RagTop66
Active Member
Looks great!
oldkimmer
Active Member
Awesome. Glad u got it figured. Kim
Similar threads
