WANTED '62 300 exh manifold

Status
Not open for further replies.
Same all BB in 62, Except the dual quad right side is different. The 1960 right side manifold has generator mount in the way of alternator bracket.

Unsure about 63-64 bit should be the same idea if numbers are different. Not a guarantee on the flange fitting The pipe.
 
Heres the casting number for the right side manifold

20210630_091305.jpg
 
I do have that manifold. Here's some photos:

IMG_0436.JPG


IMG_0437.JPG


IMG_0438.JPG


IMG_0439.JPG


Looks like it's in nice shape, though the heat riser flapper is cracked and loose on the shaft.

I'd like to get $65 for it, plus shipping. I can bring it to Carlisle if you or someone you know is going.

I have no problem if you want to wait to see if Sgt Fury has a better one.

Jeff
 
I do have that manifold. Here's some photos:

View attachment 470110

View attachment 470111

View attachment 470112

View attachment 470113

Looks like it's in nice shape, though the heat riser flapper is cracked and loose on the shaft.

I'd like to get $65 for it, plus shipping. I can bring it to Carlisle if you or someone you know is going.

I have no problem if you want to wait to see if Sgt Fury has a better one.

Jeff
Thanks Jeff!! I'll let you know. I would need it shipped to Wisconsin.
 
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg
I have this one off off a 61. Same part number. The heat flap is stuck at the moment. Have not tried to free it.
Don't see any cracks.
I several more,but they are on cars,that I would keep complete at the moment.
$50 plus ? shipping from California
Whichever you decide it's all good!
 
It's interesting that all three manifolds have the same casting number, but it's obvious that none of them came from the same mold.

I guess that the molds had a fairly short lifespan and were replaced often.

Jeff
 
Status
Not open for further replies.
Back
Top