SOLD (Mine) Like New Holley 750 w/electric choke

Status
Not open for further replies.

75LandYacht

Yank Tank
Joined
Oct 1, 2015
Messages
6,339
Reaction score
6,676
Location
Westchester NY
Feedback: 0 / 0 / 0
Contact seller
Good evening ladies and gents, up for sale is a barely used almost in new condition Holley 750 carburetor, electric choke and vacuum secondary. When I was purchasing my 77 NYB, the car was out of state and a non-running condition. In order to get a good price on shipping the car had to be running, so I had a mechanic in the town the car was located install this carburetor, brand new in the box at the time, to get the car running for transport. So this carburetor literally only has HOURS on it and not miles. The car was transported to me here in New York, and within a few days time I swapped it out to an Elderbrock that I had. So even though the carburetor looks dusty, it’s just from sitting in the box in my garage. The carb was $325 brand new.
Not looking for the 325, but make me a good offer. And its yours
c500f6ea-aa4a-4997-ba2c-dbf04525f970-jpeg.jpg

38417a6d-c59d-485d-8ced-561241e48b4c-jpeg.jpg

be8276fd-c150-4100-a541-a9d17314dcbd-jpeg.jpg

de47367e-30c1-4bf9-8f78-95772cf4bc71-jpeg.jpg

0921082e-13d8-4a1f-ac2d-a8aabb16dfe6-jpeg.jpg

165a5201-7e1d-4c58-95d1-96ab4bb6ef4c-jpeg.jpg
 
Hi
How old is the carb?
What is the distance outside primary throttle valve to outside primary throttle valve?
What is distance center to center on mounting bolt holes, measured side to side and front to back?
Thanks, Ben
 
Hi
How old is the carb?
What is the distance outside primary throttle valve to outside primary throttle valve?
What is distance center to center on mounting bolt holes, measured side to side and front to back?
Thanks, Ben
Ben. The mounting plate holes are 5” X 5.5”. as you’ll see i took pics of the other measurements. You decide what numbers your looking for. Hope that helps ya.
 
The mounting plate holes are 5” X 5.5”. as you’ll see i took pics of the other measurements.
I need to measure my intake now. Good that you lit a fire under me to do that.:thankyou:
What is the distance outside primary throttle valve to outside primary throttle valve?
Looks like 3.125-3.25". Correct me if wrong.
Of course, if badvert65 has already purchased, LMK. Thanks, Ben
ede5fc5a-ce67-49ea-893e-c7a74aabeb93-jpeg.jpg
 
Ben. The mounting plate holes are 5” X 5.5”. as you’ll see i took pics of the other measurements.
Weiand 8007 Carb opening
Mounting: 5x5.5 is not going to work, measured bolt center to bolt center. I think I need to bow out. thanks anyway!

· Width: inner 4.25 center to center

· Width outer 5 3/16 center to center

· Front to back 5 11/16 center to center
Width OD

· Primary 4 inches

· Center 3.875 in

· Secondary 4.75 in
Depth Front to back

· Outer primary to rear 3.5”

· OD primary to OD 2ndary: 3.75 in

· Center 3.625 in
 
Weiand 8007 Carb opening
Mounting: 5x5.5 is not going to work, measured bolt center to bolt center. I think I need to bow out. thanks anyway!

· Width: inner 4.25 center to center

· Width outer 5 3/16 center to center

· Front to back 5 11/16 center to center
Width OD

· Primary 4 inches

· Center 3.875 in

· Secondary 4.75 in
Depth Front to back

· Outer primary to rear 3.5”

· OD primary to OD 2ndary: 3.75 in

· Center 3.625 in
Np. Thank you
 
Status
Not open for further replies.
Back
Top