kenmdale
Member
What seems to be the consensus for which clamps to use for radiator hose. I have a several of each
Cheers
Ken
Cheers
Ken
Which clamp is better
- Thread starter kenmdale
- Start date
72Fury
Senior Member
The one on the left is less likely to strip/fail.
This style for me.
NEW 1970-74 Mopar Small Block Hose Clamp Kit W/Air
NEW 1970-74 Mopar Small Block Hose Clamp Kit W/Air
I use these.... I haven't had one fail yet.
I use these.... I haven't had one fail yet.
Same here. Just be sure to buy good ones. I like to use a nutdriver or 1/4 drive sockets to tighten rather than a screwdriver.
The OEM style Corben or spring clamp is nice if you are doing a restoration where originality is a goal, but they can be a PITA to work with.
commando1
Old Man with a Hat
That's the key.
stubs300
Senior Member
Just remember, Corbin's suck!
kenmdale
Member
i seem to have a consensus , thanks
Ken
Ken
65sporty
Old Man with a Hat
Both choices will work fine, and as was said use a nut driver and socket. Just be careful not to strip the clamp. Quality clamps will take more before they strip.
live4theking
Old Man with a Hat
- Joined
- Nov 24, 2014
- Messages
- 12,423
- Reaction score
- 8,476
I like either one in stainless.
There is an even better choice ....More Information for GATES 32348
These are for silicone hose, but work great and don't cut the hose like a regular worm drive clamp.Rockauto has them at a pretty good price.$1.58 to $1.97 ea
Depending on local climate,both can fail when old and crusty..(like some members,Heh heh).
As much as I like the pretty O.E. hose clamps,I use the ring gear clamps on the right.
mr. fix it
Old Man with a Hat
That's the style I use!
I've had two fail, but they are still what I use.I use these.... I haven't had one fail yet.
jct
Senior Member
if you don't over tighten these clamps, which i've seen and have done. none on my cars that's for sure, just on old irrigation systems
Similar threads
