69 fury, tach.

I would consider a clock.
 
Last one l saw woulda cost me 1000 in trade....they didn't want cash....yet to see another.....clocks are easy.....
 
Last one I saw went over 800 dollars on e bay. It was NOS , but I couldn't go that high. I've seen three not in cars in 30 years.....
 
Oh....that s ALL I need? Or the winning lottery number which is about the same odds
 
Oh....that s ALL I need? Or the winning lottery number which is about the same odds

Seriously, none of that is really hard. Small tachs are a dime-a-dozen, so are the clocks. Disassemble old clock, use housing and face. Remove printing from clock, paint black. Create tach face on computer, take to a guy that makes T-shirts or knows how to print vinyl graphics. Put new tach behind re-created face.

Of course I oversimplified this, but not really impossible.
 
Seriously, none of that is really hard. Small tachs are a dime-a-dozen, so are the clocks. Disassemble old clock, use housing and face. Remove printing from clock, paint black. Create tach face on computer, take to a guy that makes T-shirts or knows how to print vinyl graphics. Put new tach behind re-created face.

Of course I oversimplified this, but not really impossible.
Does anyone have a good clear picture of the tach. I am aware of how hard it is to find one of these. Yes I have many clocks to choose from to work with at creating my own unit, but I would like a very accurate pattern to go by for the face of what I may have to create. Thanks.
 
Probably just as rare but Police Cars of that year had an oil pressure gage in the clock spot, just an option.
 
The oil gauge is a bit easier to locate because of all the police units that came with them
 
$(KGrHqUOKpIFIBfQZQgNBSI3VPKEJw~~60_3.jpg
C%20body%20tach%20rear.JPG
C%20body%20tach.JPG
dash tach.jpg
$(KGrHqUOKpIFIBfQZQgNBSI3VPKEJw~~60_3.jpg
C%20body%20tach%20rear.JPG
C%20body%20tach.JPG
dash tach.jpg
 
I would only install an original but I agree. There is a small market.

The guy who built the 71 Polara four speed six pack car in Virginia did a nice job in making one for that space but the photo eludes me
 
Would this part also fit a Chrysler dash? It sure looks similar. Maybe use a slightly different (skinnier) font.
 
Back
Top