66 fury vip 2 door

karel

New Member
Joined
Nov 21, 2016
Messages
48
Reaction score
12
Location
montana
hi folks picked up this fury vip for 1800,the old man told me care is rare,me have no clue,lol
car prolly has all original parts I'd say 96%
need all the side chrome,but not going to get it,as I think car looks better with out it

so things I've done in past 2 years so far to it
new vynal top,master cylinder, brakes,and have to get new fuel pump,as I got wrong one.this car has been sitting since 97,day I got it out put gas down the card and fired right up.am rebuild carb have it all broke down soaking in vinagar. new windshield will go in when it warms up,so have not really put a lot of money in it
even came with original build sheet.started to put all new window felt in als0

1489430391297-2096673951.jpg
 
might need some parts,like the kick panel,some drilled a hole to put a speaker in,argh......so when I get my small list together,I will post maybe someone can lead me the right way
 
Nice ride, man! Good luck on the parts, if you're gonna find em, you'll find em here.
 
thanks,hardest part will be a new dash as mine has a crack in it
 
So is she a 67 or a 68?

I was about to sayou that I don't think it's a 66!

With just dashes, do you supply your existing dash pad and they repair it? Or do they manufacture a complete new dash?
 
I was about to sayou that I don't think it's a 66!

With just dashes, do you supply your existing dash pad and they repair it? Or do they manufacture a complete new dash?
As far as I know, unless it's a common one, you supply your pad as a template. I can't imagine how they'd repair a crack as its vinyl bonded to foam but again, I've never checked in. Been lucky with dash pads this!
 
I have been looking for a used dash pad for my 69 Fury so I can send it out to be rebuilt. Expensive ,like 700 bucks + shipping.
 
ouch, expensive.

i thought you would have to send your original one to them, thanks for that.
 
You do sent an original. I just didn't want to not have a dash pad while one was being rebuilt.
 
that's the crack I have,maybe use a filler it fix it for now

1489532763418-621020998.jpg
 
Last edited:
got new fuel pump and filter on,started right up after sitting since last june,thinking about dropping the back end down 3 inches and little in the front,what ya folks think about that
 
got new fuel pump and filter on,started right up after sitting since last june,thinking about dropping the back end down 3 inches and little in the front,what ya folks think about that
do it.

i dropped my 66 3inches and threw some 18s on there!

16835859_10158212788845585_2744228487577626532_o.jpg
 
hello folks,can anyone help me out,I need a slide pin for passenger side window
 
I will post another pic of the fender blinker mount I need when I'm done with work
 
so got a rebuilt 383 out of a 69,just needs the rebuilt out and if I can swing it get bigger cans and will be at 500 hp,can't wait to hear it run,think I'm going to give up trying to find few parts for my car,not luck searching the web
 
well about to start the inside painting,doing the dash,think I'm going to love the color
 
Back
Top