66 fury

nikko

New Member
Joined
Oct 1, 2018
Messages
30
Reaction score
3
Location
canada
can anybody tell me if the torsion bar bracket/tranny mount from a 66 dodge or Chrysler C body will a 66 fury 111 convertible...thanx
 
hi ross...thanx...are the stub frames the two short outer ones?...will I have to replace them with Plymouth convertible or can they be off a 4 door?
 
The whole front frame assembly is known as a stub frame, and bolts to the body shell essentially under the front seat area.

I believe you can replace it with one from any 66 Plymouth Fury. Although they look nearly identical, Dodge and Chrysler stub frames are longer and won't fit.

Here is a picture of a 1966 stub frame. The area at the top is where the cross member goes.
1966 Sub Frame (Small).JPG
 
thanx ross...previous owner torched off cross member(lazy I guess) about an inch from torsion bar. can I box it in and fab up my own cross member?
 
hi ross...there isn't a lot of these cars around...not sure where to find a doner or one that's already out...could be u know where?...appreciate any help...thanx
 
thanx again ross....I found a 2 dr that's been sitting for 20 years...cost me a bottle of whiskey...now the work starts...have a nice day
 
Back
Top