Exhaust joint midway back...why is it there?

But I do. At least for the one over the rear axle. I still need to find the rear tailpipe hanger one.

C4F54E29-F791-43E9-B919-BBC6752591BE.jpeg
50DD9FF0-4E43-4792-8B9F-86C31F253C5F.jpeg


7DA78891-A8C5-4753-8462-4684DB506A42.jpeg


AD65A9A5-46A8-406E-A8D0-446442D6FDD4.jpeg
 
It must be exhaust season. I am at the point where I need to figure out what I want to do. I am really leaning towards stock style single exhaust, and original hangers. It seems my only options are Waldron, or going down to a local shop to see what they can do.
A good exhaust shop should be able to build it for you. My guy is 60 and has been doing it over 40 years, he has the bending cards and can build what ever I may need. I worked at a exhaust shop 20+ years ago and I believe there is a art to it. Some guy's can just picture what needs to fill the space and make it with the bender.
 
My '69 Grand Prix tail pipes are rotting out. The local exhaust guy custom shop did it 25 years ago. His estimate for spring 2019 is $350 aluminized stock type dual mufflers w/o resonators. Ask around other car dealers and/or enthusiasts for a reputable custom shop.
 
My '69 Grand Prix tail pipes are rotting out. The local exhaust guy custom shop did it 25 years ago. His estimate for spring 2019 is $350 aluminized stock type dual mufflers w/o resonators. Ask around other car dealers and/or enthusiasts for a reputable custom shop.
Pretty good price especially if he has to bend the tailipes which are the most difficult part to bend properly.
Pypes Exhaust makes a complete system bolt on for just over 400.00--just pic your own mufflers
64-72 A-Body 2.5" Crossmember Back w/o X-Pipe System SGA30
 
Yes, I looked at that system and others to compare. Must add shipping plus not up to the exhaust manifold. Plus t-pipes should come down a bite of an angle. Plus the same guy did my car last time so he has decades of experience.
 
That's for a Dart, that's gonna be a little short, isn't it? There's about a foot missing from my Dart that my Polara has!
Crap. was not looking closely thought that was GM A body which is what the GP is. Thanks
 
Crap. was not looking closely thought that was GM A body which is what the GP is. Thanks
Crap part two! I didn't look, it is for a GM, guess you can tell where my mind is, Moparland! As you were.
(No wonder it's so cheap!)
 
Hey Frank, #17733 has a body measuring 14´´ instead of 20´´ (#17749) cbarge has.
 
Back
Top