1968 NewYorker front drum brake suspension help

GOLDMYN

Senior Member
Joined
Nov 23, 2013
Messages
1,423
Reaction score
1,898
Location
Chilton Wi
Hi, I'm looking for the part# or purchase outlet for the upper control small rubber bumpers. I already
DSC05073.JPG
have the cone style bumpers that go onto the frame bracket. I hope I've made myself clear. Any help will be appreciated. Thanks
 
I will look but I think I got mine from someone who is no longer in business.
 
I suspect they would be the same all the way through the 1973 model year for all C-body cars? Is there a 7-digit casting number on them, which might well equate to a factory part number?

CBODY67
 
I looked through my inch of receipts. I have bad news, I never found a replacement rubber bumper. Mine were in decent shape, so I may not have hunted too hard.
 
Last edited:
I just bought some from oreilly's. It wasn't listed on their site. I took my bolt/remaining rubber and matched it up but I don't remember the part # right off. I might can dig up a receipt and # later today if you need me to.
 
Last edited:
No luck. I guess that I threw that receipt away. But I did search Oreilly's site and found what I think I used. For some reason 1965 Chrysler is not covered very well in their system so I have to search '67 for parts sometimes. Anyway, I believe that I used the dorman one as it was in stock. It's listed at something like 2 1/2 inches, which seems long, but squishes down and fits well when tightened. There are others available under my search for "upper bump stop" so take a look and see what you like.
upload_2019-4-12_13-20-12.png
 
thank you, research shows Dorman# 31054 is a kit which contains the big and small one. O'rellys also has it .
 
Last edited:
Back
Top