WANTED 15" late 70s factory aluminum wheels

Status
Not open for further replies.

moparagogo

New Member
Joined
Dec 4, 2010
Messages
36
Reaction score
53
Location
SW PA
Feedback: 0 / 0 / 0
Contact seller
IMG_20190407_131341.jpg

I would like a set of these.
Prefer the ones without the holes
Not sure of the year or model.
Thanks
 
Late '70's Cordoba and Magnum wheels....



1978 magnum.png


I have four of the wheels w/o the square holes...
I do not have all the centers....

1979-chrysler-cordoba.jpg
 
Last edited:
if you don't mind could you take a measurement of the center for me when you have a moment....thanx
IMG_20190407_131341_LI.jpg
 
Here is my set. I started cleaning one to see how it would clean up. With some more elbow grease it would really shine. The one I cleaned is the only one that shows any curb rash(marked) and that's not much. I have the wire centers but no caps. I also took a picture with another center.

100_0622.JPG


Inked100_0623_LI.jpg


100_0625.JPG


100_0626.JPG


100_0627.JPG


100_0628.JPG


100_0632.JPG


100_0633.JPG
 
Must've been a mid-year addition because they don't appear in any brochures that I've ever seen until 1978.

That´s interesting. It could have been that they were not planned to come out in 77, like the 69 Imperial Crown, which was advertised only as being a 4dr sedan.
 
Yes? What's needed? These are M & B/R body forged aluminum wheels. 15x6 used for sure until 1980 (see brochure clip below). I suspect they were used until 1981 and went away with the R bodies, but I have no proof.

Chrysler pushed these wheels hard in 78/79...all the brochure cars featured them. I had a set on a Cordoba. Very light feeling. The centres and domes are prone to flying off, unfortunately. These are often found incomplete and missing the domes and centres.

80NY10_jpg.jpg
 
Oh and the same wheel was used on Lincolns, albeit with a different dome and centre and no black accent stripes. The Lincoln ones have a 5x5 bolt circle and work on Fusey Imperials.

4214df747e2687b0f309707520cd5d1d.jpg
 
Have no idea what they are worth. Would consider selling for $70(?) a wheel plus shipping.
 
@CanCritter

The center is just a bit less than 6", so it's just like the vented wheel posted above.
 
Oh and the same wheel was used on Lincolns, albeit with a different dome and centre and no black accent stripes. The Lincoln ones have a 5x5 bolt circle and work on Fusey Imperials.

View attachment 295327
I always suspected these were the same wheels, and didn't know if the Lincoln ones were also on a 4.5" bolt circle or not.
 
I always suspected these were the same wheels, and didn't know if the Lincoln ones were also on a 4.5" bolt circle or not.

Yup..it's been done before. I would convert to the Mopar domes and centres myself. Or road wheel domes/ centres. I think that would look better.

I think it's a great alternative for Fusey Imperials. The factory wheel covers are almost always dinged up. Some so much so that they're unsightly.
f7ac74cbce18cbc62c966cb718833955.jpg
 
Status
Not open for further replies.
Back
Top