WANTED 6 way power buckt seat switch for 69 300
- Thread starter Hemi pwr
- Start date
- Status
That's the same one they use on the 70's. They are very hard to find. There is a guy on the west coast that can rebuild them much cheaper if you have the core.
@Trace 300 Hurst had his done and can give you the info.
I've also used switches from other years to make the seats function. Of course they don't fasten to the seat like the correct one, but they are much easier to find and cost a small fraction of the price.
@Trace 300 Hurst had his done and can give you the info.
I've also used switches from other years to make the seats function. Of course they don't fasten to the seat like the correct one, but they are much easier to find and cost a small fraction of the price.
Hemi pwr
Member
thanks for the info
Ironwolf
Senior Member
I saw this on E-Bay ..........
Will this one work for you ? It's a different number...
1969 1970 1971 1972 Plymouth Dodge NOS 6 Way Power Seat Switch 2926262 * H | eBay
1969 1970 1971 1972 Plymouth Dodge NOS 6 Way Power Seat Switch 2926262 * H
Be the first to write a review.
Item Information
Condition:
New other (see details)
Price:
US $55.00
Buy It Now -
Add to cart
Will this one work for you ? It's a different number...
1969 1970 1971 1972 Plymouth Dodge NOS 6 Way Power Seat Switch 2926262 * H | eBay
1969 1970 1971 1972 Plymouth Dodge NOS 6 Way Power Seat Switch 2926262 * H
Be the first to write a review.
Item Information
Condition:
New other (see details)
Price:
US $55.00
Buy It Now -
Add to cart
- Joined
- Nov 14, 2010
- Messages
- 27,930
- Reaction score
- 26,864
I have an NOS bezel if you need but I’m guessing you’re replacing an existing? I’d send them to the guy above that Trace used. I’ve got one of his panel dimmer switches in my ‘67.
Hemi pwr
Member
Thanks Ironwolf the switch on e bay is not the one I need it might work but wont fit in my factory bezel thanks very much for the link
Shamelessly stealing @Trace 300 Hurst 's photo.
This is the style switch. This is a bucket seat 69/70 only switch
eBay pic from a while ago
This is the style switch. This is a bucket seat 69/70 only switch
eBay pic from a while ago
Hemi pwr
Member
Hemi pwr
Member
yes that's the one I need ….thanks
The guy is simply shameless!
Yeah, you need a switch, you need a bezel....but you also need the damn bracket. I had to make one.
Hemi pwr
Member
I just need the switch I have a bezel and bracket ...just the switch
Oh....I thought you were looking for a bezel, too.
My car came with a total vacancy in the seat bottom where the switch assembly should have been. I needed all three parts, and I built a new switch for the passenger side using assorted parts. That switch worked, but the center knob was wrung off. I wonder what decade that occurred......
Incidentally, I did not use Devinism myself, I only heard good things about him from this board and the other -Bod boards.
My car came with a total vacancy in the seat bottom where the switch assembly should have been. I needed all three parts, and I built a new switch for the passenger side using assorted parts. That switch worked, but the center knob was wrung off. I wonder what decade that occurred......
Incidentally, I did not use Devinism myself, I only heard good things about him from this board and the other -Bod boards.
3C's & a D?
Senior Member
This one showed up at the wreckers not too long ago, roll up windows, dual power seats. Sitting for twenty plus years. Smell it from ten feet away. I'll see if the parts are still there, soon. Car is a 1970 Chrysler 300 four door.
3C's & a D?
Senior Member
That one actually looks like it would transplant into the correct bezel.
Samplingman
Old Man with a Hat
Holy crap, you should grab those door pulls, they look complete!
3C's & a D?
Senior Member
Sorry for the late response, we had the most rain in July compared to the last twenty years! I feel ripped off here! The drivers side is rough, note crack in chrome on joystick and slight pitting in the other switches. Passenger side had the joystick broken off. Not sure how nice your car is, let me me know what you think. What's wrong with your's? I rebuilt mine a while ago, works great now. This one feels like it will work, clicks in all positions, except back. Last two are force flash.
3C's & a D?
Senior Member
Those were the first to come off, chrome pitted, however two pulls are perfect. One near perfect, the other sorta passable.
Hemi pwr
Member
Hemi pwr
Member
Thanks very much but I just bought both sides and are on the way to me now ...thanks guys for all your help and info
- Status
