ColdCase shroud fitment ?

[5wndwcpe]

Any of you guys out there that have a 26" Cold Case radiator and are using the factory shroud - how does it fit ? Did you need to modify the shroud and/or mounting points to make it work ?

Specifically, I'm looking at the MOP757A ('66-'70) but welcome any input.

Thanks

 

[MarPar]

Pete,
Cold Case is a vendor over on FBBO

Cold Case Aluminum Radiators

 

[carrman]

Mine fit great with no mods.

 

[5wndwcpe]

Pete,
Cold Case is a vendor over on FBBO

Cold Case Aluminum Radiators

I talked to Chris from CC late last month but they didn't have one in stock to check and I don't want to hack up the OEM shroud.

 

[Ccas]

Because of help from forum members here, MOP757A was designed specifically to accept the OEM fan shroud. If you use the MOP757A, the shroud is going to fit very nicely.

If you use one of our other 26" units, the radiator will fit the support but the factory shroud will not install easily. The other 26" units will require the Cold Case shroud and fan kit for a complete installation.

I hope this clears up the differences.

 

[carrman]

Again, I am running a 757A and my factory shroud fit perfectly.

 

[saylor]

when making the holes to attach the electric fan shroud, make sure the shroud is square on the rad and doesn't move on you while drilling. . .I almost drilled into the side of the radiator.

try not to die -

- saylor