Anyone know of a vendor that makes a baffled tank for EFI in tank pump and return line? Or a good custom tank builder? Thinking about a Holley Sniper setup for a 74 440/727 cop Monao. Thanks
View attachment 309737
Thanks, getting "canie and wormie" the more I check. Then the whole computer tuning comes into play.
Not an option, required safety equipment and ice chest of PBR in trunk. ThanksUnless there are rules against it, I think the path of least resistance for you is a fuel cell in the trunk. With the bottom sump I think the only way you could cavitate the external pump would be pulling G's on a skid pad with less than 1/4 tank. Under "normal" conditions I think you'd have to be almost out of gas. The sump on mine if I had to guess, held at least a quart and the foam kept the slosh to a minimum.
Kevin
That's trick but need baffles.When I was looking into this my plan was to buy a new tank and install a fuel pump recess in the top.
Weld in Fuel Pump Recess
This would allow you to use an in-tank pump, later sending unit and keep the original fuel fill.
Actually, that will work. Will cut a long side wall off the tray and turn it sideways so it will tuck under body as embed in tank where existing outlet etc is. While that square hole is open we will custom build a baffle box to tack in tank bottom. ThanksThat's trick but need baffles.