66Plymouth
Member
Gentlemen, I have a 66 Fury 3 and having electrical issues and figure its time to bit the bullet and go through all the wiring. In order to remove the dash I need to remove the windshield is that correct?
Yes as stated in order to remove the dash the windshield must come out which is a big deal. I attached a pic to show why, there are screws along the front edge which can’t be accessed until you take the windshield out.So I've replaced most of the engine wiring with 14g and solder ends. Up under the dash is the concern right now. It appears that some wires are just cut and hanging and I would like to take or pull the dash out some to access the wires and change rhe bulbs.
In the past I took apart most of the front dash hoping to get to the wiring , but was unable to remove the main panel( all the gauges) so I stopped in fear of breaking something. The bulk heads I know can be replaced and that's on my list as well (total of 3) that snap into place. I have the service manual and I appreciate the link that you sent for the online one which I'll download as well.