For Sale 78 NYB Seats & Interior Parts

Status
Not open for further replies.

71NewYorkMan

Member
Joined
Jul 4, 2012
Messages
180
Reaction score
239
Location
Rincon, GA
Feedback: 0 / 0 / 0
Contact seller
I recently acquired a parts car for my Kinda project from a Derbier who got out of the business after he purchased this car. He started stripping it, but didn't get very far. The car has 90% of the parts I need for Kinda. It also has a fairly complete CS23 PLA3 Grey interior in "Very Good" to "Near Excellent" condition which I have no need of. This car appears to have been very well kept. The original owners home shows 2 garages in Google Maps. The Derbier kept it in his shop from 2005 till Jan 2019 when he moved it out to make room for his other projects. Hopefully someone else can make use of these parts-

1 x (left / right) front split bench in grey leather. $200
Includes- seats, power seat back releases, anodized aluminum base trim. NOT INCLUDED-power seat bases, motors, harnesses, switches.
1 x rear bench seat in grey leather. $75
1 x left door upper and lower panels $50
1 x right door lower panel $25
1 x dash pad $50
1 x steering wheel w/ horn pad (minus medallion) $25
1 x left sail panel trim including c-pillar pillow $25
1 x right sail panel trim including c-pillar pillow $25
I have 3 of the 4 pull straps that were mounted in this vehicle. They will go with the panels they were originally fitted to, or separately if someone asks.

The leather and vinyl on the seats is in remarkably good condition. It appears to have been kept clean and "oiled" when the vehicle was in service. The dash pad has no cracks or signs of "sun fade" . The door and sail panel trim panels DO NOT have torn out mounting clips! The fiber board backings in these panels are not water damaged or decayed! In the following pictures, you may notice "light" spots where I spot cleaned the surfaces to reveal condition.

If you see something that interests you, let me know. Not trying to profit here, but merely wish to defer my parts costs of my own project. Shipping / transport for all parts TBD. I would be willing to travel up to 300 mis one way for the costs of fuel, a meal, and a handshake.
IMG_1585.JPG
IMG_1586.JPG
IMG_1587.JPG
IMG_1588.JPG
IMG_1589.JPG
IMG_1590.JPG
IMG_1591.JPG
IMG_1594.JPG


IMG_1592.JPG


IMG_1593.JPG
 
Last edited:
I travel up and down 95-26-77 all the time between here and Florida. I'll be going to Florida after Thanksgiving. what would you have to have for them if I decided to get them, and they fit my seats?
 
$200 for the front seats, $75 for the rear.
95-26-77 passes you close to Rincon, outside of Savannah.
I will be going to the Moultrie Swap meet 23 Nov. (as visitor, not vendor). Also Turkey Rod Run in Daytona Thanksgiving week-end. I could meet you somewhere?
As to your inbox, have a look at this recent post?
how do i delete stuff in my inbox
 
Are you selling any body parts. If available what is the condition deck lid and both rocker panels. I am also interested in the power window master switch.
 
Are you selling any body parts.

Despite being well kept, this was an Ohio car its whole life. Both fenders rusted through, both rockers rusted through at rear, left quarter moderate rust, right quarter minimal rust. Both doors rusted at lower seams. But- solid floors, trunk, hood & deck lid. Solid roof is destined for my Kinda project. Quarter panels and extensions will also be used for my project. For now, I will keep the body complete so I can keep it weather tight. Once I start cutting it up, I'll offer trunk floor, hood, and deck lid. All of the glass is clean as well. I'll offer this, but keep the windshield as a spare. Motor and tranny were removed by derbier.
All window switches, motors, lamps, relays, solenoids, etc. are being retained as spares for my car.
I have learned ( with this parts car) that window "master switches" are the same for two and four door cars! Only difference is that the two door versions do not have the chrome toggles mounted. Besides that, they have all of the contacts and rocker bodies mounted! Meaning- I now have several "master" switches in my inventory. If you are handy at repairing these switches, I would be happy to supply parts at minimal expense after I have finished inspecting and testing everything I have just acquired.
 
$200 for the front seats, $75 for the rear.
95-26-77 passes you close to Rincon, outside of Savannah.
I will be going to the Moultrie Swap meet 23 Nov. (as visitor, not vendor). Also Turkey Rod Run in Daytona Thanksgiving week-end. I could meet you somewhere?
As to your inbox, have a look at this recent post?
how do i delete stuff in my inbox
I've got seats from a 73 New Yorker. Just looking at those chrome pieces for mine.
 
$200 for the front seats, $75 for the rear.
95-26-77 passes you close to Rincon, outside of Savannah.
I will be going to the Moultrie Swap meet 23 Nov. (as visitor, not vendor). Also Turkey Rod Run in Daytona Thanksgiving week-end. I could meet you somewhere?
As to your inbox, have a look at this recent post?
how do i delete stuff in my inbox
Would you have the room to bring the seats to Daytona? I'm starting to think they might be worth thinking about for the "parts car", Ideally we can barter for at least some of the value.
 
Status
Not open for further replies.
Back
Top