Convertible boots 1969 Fury - correct clips

Your boot has to have the correct "pockets" for the clips to set into.
Please don't drill the trim for the snaps. Get the right boot and hardware... Too many of these cars have been done incorrectly.

Agree 100%. You may also look at these guys. I haven't needed to change any of my boots, but I read on the old DryDock of a member's having had a good experience with them back in 2011 or so. You may have to call them to buy the snaps separately.

Finally, @furyfrank had the original ones from a 1969 Fury for sale back in September.
 
Last edited:
B32072F0-581D-4484-9C80-74E67F0BBFCC.png
I recently acquired a ‘69 Newport ragtop - sans boot - which I received. It didn’t have plastic clips that everyone talks about. Where can I get these clips? It came with hardware to punch/drill snaps, but that can’t be correct. Thanks! Billy H @ [email protected]
https://www.legendaryautointeriors....8/08/2019-Chrysler-A-and-E-Body-Catalog-1.pdf Page 106 of legendary auto interior’s Mopar catalogue
 
They say the clips are for an e body but they look a lot like what the Fury would use. At 5 bucks a pop it may be worth buying 1 first to make sure they will work properly.
 
Back
Top