WANTED 26 in C body Fan shroud

[CanCritter]

68-70 26" in fan shroud wanted for 70 fury...
Thanx

 

['69FuryIIIConvertible]

If you find a source with more then one, give me a shout.

 

[CanCritter]

If you find a source with more then one, give me a shout.

they repop them in the states...they can be had for around 165 usd...1968-1970 440/26 in rad...3 mounting holes on each side..to me with echange and shipping will run the 250-275$ mark...picked one up but its only got 2 mounting holes each side..screwed up

 

['69FuryIIIConvertible]

they repop them in the states...they can be had for around 165 usd...1968-1970 440/26 in rad...3 mounting holes on each side..to me with echange and shipping will run the 250-275$ mark...picked one up but its only got 2 mounting holes each side..screwed up

Didn't know they were popped, good to know...

 

[sixpkrt]

DMPS-7289-2785434 Mopar 26" Fan Shroud 1966-1970 C-body - dantesparts.com

 

[3C's & a D?]

they repop them in the states...they can be had for around 165 usd...1968-1970 440/26 in rad...3 mounting holes on each side..to me with echange and shipping will run the 250-275$ mark...picked one up but its only got 2 mounting holes each side..screwed up

I looked for you, all I have are 71's, they have two holes each side. Perhaps that's the one you got?

 

[CanCritter]

sorted.....delete thread

 

[3C's & a D?]

sorted.....delete thread

Drill a couple of holes?

 

[CanCritter]

Drill a couple of holes?

ndot quite...thought about it but shroud sat to far away from rad to be useful ...thought ld just slide it in...after a little trimming and die grinder time voila...71 shroud in a 70..sits in there quite nicely..no overheating for this puppy

...