WANTED 1969-1971 Chrysler 1/4 panel extension LH side

Status
Not open for further replies.

furyfinn

Senior Member
Joined
Jan 17, 2013
Messages
1,008
Reaction score
618
Location
Finland
Feedback: 0 / 0 / 0
Contact seller
From what I can see in the pictures, I'd say a 69 extension is different from the 70-71
 
The trunk lid "rear lip" is lower on the 1969, due to the 1969 Chrysler not having a rear loop bumper yet. Also, the end cap does not have a protrusion to go along with the side-to-side crease in the deck lid. Accordingly, the end cap is shaped differently. For copmparison, here are two pics:

1969:
1969_Chrysler_rear.jpg


1970/1971:
1971_Chrysler_rear.jpg
 
I have a 70. I'm out of town until Saturday but I can get you a better picture then.
IMG_20200114_102534.jpg
 
Last edited:
Thank you guys! Yes, 69 looks different, so the ebay guy is a bit wrong...

@barnfind , @azblackhemi , I will waite until both of you have checked your parts stores and given me more info.

:thumbsup:
 
@azblackhemi , have you been able to take closer pics of the part?

@barnfind , your last pic... It's a little blurry, but is there damage where the bolt should go in?
 
Here's the pictures. All studs and nuts are good. Extension is really nice other than it has a corner piece missing from behind the bumper. First picture shows it. I will pm you a price.
IMG_20200202_115016.jpg
IMG_20200202_114917.jpg
IMG_20200202_114928.jpg
IMG_20200202_114935.jpg
 
Status
Not open for further replies.
Back
Top