61 CROSS RAMS

[owen413]

Need info.on where I can buy a used or new camshaft for 1961 413 with long rams?

 

[Newport 66]

Go with a new camshaft, lifters, timing chain and gears. Lunati makes a pretty close match to the original '61 cam specs or Hughes Engines also has a good camshaft for that application.

 

[owen413]

Go with a new camshaft, lifters, timing chain and gears. Lunati makes a pretty close match to the original '61 cam specs or Hughes Engines also has a good camshaft for that application.

Newport 66, thanks for your reply, I will take your advice

 

[owen413]

Newport 66, Thanks for your reply' I'll take your advice.

 

[Newport 66]

You're welcome. Good luck and let us know how you make out. Any pictures of your project?

 

[owen413]

You're welcome. Good luck and let us know how you make out. Any pictures of your project?

Never gave it a thought,I'll give it a try, thanks.

 

[ricks_RR]

if you can go roller not flat tappet . the new roller set ups are alot better with the new motor oils of today

 

[Newport 66]

Keep in mind, when you do rebuild or improve your engine that you use a high zinc content oil for anti-wear properties in our old engines.

 

[owen413]

if you can go roller not flat tappet . the new roller set ups are alot better with the new motor oils of today

Thank you, for your reply did not know that.

 

[sportsuburbangt]

Check out the 300 club they have a member that is rebuilding an match to the original cam for the 60-61 long ram cars.
www.chrysler300club.com