WANTED T&C 1970-71 lower body moldings

Dibrou

New Member
Joined
Oct 18, 2018
Messages
26
Reaction score
1
Location
NJ
Hi, wanted lower body moldings for woody Chrysler T&C 1970-71

Let me know what you have.

Thanks
70chr.jpg
 
Step one. Buy or download a factory parts manual for your car or buy a parts listing from a body shop manual on eBay.

Step two. Determine every part number for every molding that you need. Note, even numbers are right side, odd numbers are left.

Step three. Search eBay for every part number.

Step four. Google every part number + MOPAR

Step five. Google NOS MOPAR parts and go to every website that you find and use the search engine on their site to search by part number. Member Marty Mopar runs Arizona Mopar parts. Put all the part numbers in his site and see what he has.

Step six. Contact all the big Mopar parts vendors, Murray Park, Wildcat Mopars in OR, Desert Valley etc. and see what they have.

Step seven. Go to Carlisle in July and search and talk to vendors as they may have what you need at home.

You will likely have to buy on or two here, one or two there etc. unless you come across someone who has a complete nice used set from a car that they parted out.

Good Luck!
 
have these NOS:

3481963 Left QTR LOWER FRONT MOLDING same as 3620053 1970-71
3481967 left rear QTR Wheel opening MOLDING 3444037 cast on part 1970

PM for more info


see step 4 in the post above...that is how you find what you need
 
Back
Top