WANTED 1970 Chrysler 300 Hurst Glove Box Door

Status
Not open for further replies.

Robert99

New Member
Joined
Jan 22, 2020
Messages
10
Reaction score
0
Location
Pittsburgh
Feedback: 0 / 0 / 0
Contact seller
Good Morning Group - I know this may be a long shot but looking for a plastic glove box door for my 300 Hurst. Please feel free to send me a PM if you know where I might find one. Thanks
 
They can be tough to find, but they are out there. While they are specific to the 300, they aren't specific to a Hurst car. Don't turn down a green one.
 
Good Morning Group - I know this may be a long shot but looking for a plastic glove box door for my 300 Hurst. Please feel free to send me a PM if you know where I might find one. Thanks
I have one in saddle brown from a 71 300. Will that work
 
Thanks C Body Bob - just sent you a PM
I don't know if this is a common problem or not but thought I would try to upload a few photos. The plastic studs have broken off and the only thing that was holding the glove box plastic door on was the glove box lock.

IMG_0311.jpg


IMG_0312.jpg
 
Common problem. I haven't repaired one, but I'll bet I could.
 
I have 1969 unit if Bobs turns out to be different to yours. I can upload a pic if he cant help.
 
I recently saw
Common problem. I haven't repaired one, but I'll bet I could.

I had this issue with a few of my studs and it made for a rattle-y door that's only going to stress the other studs. I used epoxy or some other bonding goop to rectify, including gluing the screws back in so it all looked proper when opened.
 
Thanks Wollfen - will keep you posted
I just went & dug through my last box of parts from that 71. Not in there. I actually think I gave it to Wollfen along with some other parts for payment on work he did to one of my cars. He had a couple 300’s at his shop at that time. So sorry but it looks like Wollfen has another.
 
Status
Not open for further replies.
Back
Top