Dash wiring

m0par0rn0car

Member
Joined
Feb 18, 2020
Messages
50
Reaction score
25
Location
Plymouth, MI
The dash wiring on my 69 plymouth fury 3 needs to be replaced after a bunch of the wiring got burned up, I’d like to avoid making a harness if possible but as far as I can tell no one makes new ones for my car specifically. Are there any similar cars that i could buy a harness for and use even if it involves slight modifications? I’d also like to buy a new harness rather than an original just because I don’t want to replace the 50 year old one that failed with another 50 year old one. Thanks
 
I sourced a NOS dash harness for my 70. There are a lot of sub harnesses and connections under there. I say that because, if you are concerned about 50 year old wiring you should be concerned with 50 year old heater switches, radio, glove box light, ignition switch, signal switch etc etc. It never ends.

Bill Evans does wiring but I don't believe he does dash harnesses.
 
I’ve already replaced or rebuilt all the switches and electrical components but stupidly never got around to addressing the wiring itself
 
If your not going concourse or anything consider a Painless or a Ron Francis wire harness. All new, easy to install and you can go with a Volt meter and eliminate the Ammeter.
 
Back
Top