What's left of my build/broadcast sheet

[flyinbrick68]

here ya go guys whats left of my broadcast sheet. Why are there two spots for axle?

 

[bluefury361]

You need to get it into a acid free sheet protector and make copy's.

 

[cuda hunter]

And then stuff 5 or 6 copies into the car. One in each seat top and bottom. Someone might appreciate that in 50 years.

 

[flyinbrick68]

Yeah ill see about getting one. It was stuffed under the front passenger seat. Ig guessing it doesn't have a suregrip and has 2.71s by the sheet. Does have a code 91 in axle on a different line than where it says sg. Is there any chance they'd stuff more than one sheet in the car anywhere?

 

[cuda hunter]

I know on ebodies at hamtramck and LA plants they would put them under the carpet, in all the seats, top and bottom, taped to the rear of the glove box, seen one picture of a sheet stuffed above the gas tank. And heard of one being found in the headliner. no pic though. My b body had a sheet behind the fabrid matting in the rear the back seat top. Not stuffed in the springs but stuffed between the foam and the fabric and then the spring compressed it.
I've heard of as many as 4 in one car.

 

[polara71]

Any place one could fit, it could be.

 

[Samplingman]

I found a fragment of a broadcast sheet between the rear bumper bracket and the reinforcement.

 

[flyinbrick68]

Holy cow

 

[bluefury361]

I found six in my 67 Polara. Two were blanks with basic car type info hand written on the back.
There were actually seven, but one was for a totally different car.

 

[69CoronetRT]

Why are there two spots for axle?

 

[flyinbrick68]

Got ya assembly says 91 like a sure grip i think sales says 51. Why anyone would order one of these cars with an 8.25 is beyond me.

 

[69CoronetRT]

Got ya assembly says 91 like a sure grip i think sales says 51. Why anyone would order one of these cars with an 8.25 is beyond me.

Nothing in the D91 box = no sure grip. That the axle assembly code ends in 91 is a coincidence to D91 = Sure Grip.

 

[flyinbrick68]

Thanks