SOLD 1969-70 Chrysler 300 Single Exhaust Extension Pipe

Status
Not open for further replies.

Samplingman

Old Man with a Hat
Joined
Apr 18, 2012
Messages
6,137
Reaction score
7,017
Location
South Jersey
Feedback: 5 / 0 / 0
Contact seller
Wanted, the intermediate or extension pipe between the Y and the forward muffler for 1969-70 Chrysler P/N 2643548. It has a flange on one end to bolt up to the Y and 2 1/8 OD outlet. I don’t know the length. Thanks!

B828857A-9F6F-409D-AEE6-0A4F04348AB9.jpeg
 
Any decent muffler shop should be able to bend that up from your rusted out original as a pattern. If your original is gone, ask them to bend one up for you from the "data bend cards", or if they've got someone there who's the local bending whiz, they should be able to make it right there and then by eye.
 
Any decent muffler shop should be able to bend that up from your rusted out original as a pattern. If your original is gone, ask them to bend one up for you from the "data bend cards", or if they've got someone there who's the local bending whiz, they should be able to make it right there and then by eye.
I called the one “old school” shop around here. He had no idea what a bend card was. I would take a rusty original as a pattern if anyone has one. The car isn’t drivable yet so I can’t bring it in for fitting. I’ve sourced all the other parts, but I will use a flex pipe for engine break-in if I have to.
 
Status
Not open for further replies.
Back
Top