1970 Sport Fury...woodgrain on dash and door panels

Cadee

New Member
Joined
Sep 17, 2017
Messages
40
Reaction score
17
Location
Ontario, Canada
I'm looking to replace the worn out wood grain on the dash and on each door panel on a 70 Sport Fury.
Does anyone know if it is exactly reproduced or... where I could get a close match?
Thanks.
 
I should think the woodgrain material used is 3M di-noc vinyl as that was used on the outside of the "woodie" cars and wagons back then.

Hopefully something similar is still available if the "exact" pattern has been discontinued.

Good luck with your search.
 
I should think the woodgrain material used is 3M di-noc vinyl as that was used on the outside of the "woodie" cars and wagons back then.

Hopefully something similar is still available if the "exact" pattern has been discontinued.

Good luck with your search.

3M still makes the product line, do not know if the exact material is still available. If you google 3M DI-NOC, some links come up about the product.

Dave
 
Fury Pursuit, i need the four pieces that go on the door, one on each door.
each piece is 13 1/2" long by 2 1/2" wide.
I also need the long strip that goes along the passenger side of the dash. It is 32' long by 1 1/2" wide.
I have added some pictures. Thank you
sfgt wood grain trim 2.jpg
sfgt wood grain trim 2.jpg
SFGT WOOD GRAIN TRIM 3.jpg
 
Back
Top