What are you working on today??

[John Kirby]

side cover on an '01 cummins. had every intention of pulling the injector pump, but the sprocket wont pop. loaded it for all it was worth with a snap-on gear puller, nothing. snuck the cover out backwards between the body and the bell housing.

Maybe replace that sprocket with a Cogswell cog.

 

[rags]

@John Kirby unfortunately i'm stuck with the Spacely Sprocket. it wasn't coming off for nothing and no one.

 

[RGORHAM29]

Home office underway. Finished framing the basement, wired and insulated over past couple weeks....while working my day job. Drywall this weekend. Then back to the Fury.

 

[3175375]

Over the past few weeks, the climate control on my 2001 F-250 2WD crew cab shortbed was haywire. It seemed to have a mind of its own.
Set to anything - it was stuck in defrost. Next day, a/c worked, but that was it. Next time - full heat at the vents.

I did some research online and apparently the heater box control module was suspect. I ordered a replacement and installed it this afternoon.

Back to normal operation.
The module was easy to change as it lives behind the glovebox door. Victory!

 

[WissaMan]

View attachment 405570 View attachment 405571 Replaced the fuel sending unit on my ‘68 300 today, and now have a functioning fuel gauge

Hey Bjorn1230, it looks like you've got Harbor Freight jack stands. Double check and make sure they aren't part of the recall

Consumer Advisory: Warning to Harbor Freight Jack Stand Users

I had two sets and took them both back for a no-questions-asked full refund. Probably made a few bucks actually since I usually use a 20% coupon...

 

[John Kirby]

New rotors on the New Yorker. Pads will go on when they arrive on Tuesday.

 

[SGT FURY]

Sold a petty blue 71 dodge today and it was picked up by a petty blue/white dodge slideback.
Made a good pic

 

[LocuMob]

View attachment 409650 View attachment 409651 View attachment 409652 View attachment 409653 View attachment 409654 View attachment 409655 Sold a petty blue 71 dodge today and it was picked up by a petty blue/white dodge slideback.
Made a good pic

Is that @pomonamissel and his new flatbed?

 

[SGT FURY]

Yes

 

[LocuMob]

Both of you have quite the inventory!

 

[Mr C]

Spent Saturday swapping out to snow tires.

 

[pomonamissel]

spent sunday with a great guy , ken is a great guy n member . glad to have met him , i'm sure we will stay in contact .

 

[pomonamissel]

here it is at my shop , 71 d200 camper special was 383 auto ps pb air , this truck can fix orangey , or orangey can turn this d200 into a short d100 . lol ! oh ya knote that tunk in the bed of the blue boy , that a real car tunk from the 30's maybe 20's . its weight duty all metal .

 

[WissaMan]

A lot of various things...

Pulled some old Hudson windshields from our Grandfather's barn and cleaned them up to try and sell them.

Made a homemade forge to melt down aluminum and other metals for projects

Built a "mass loaded transmission line" enclosure for a sub speaker and amp that I had lying around from a failed project from many moons ago. I'm very pleased with the final result.

Replaced a rear drum brake cylinder on the 68 Newport project (no pics). After which it proceeded to burst a hard line :|

Enjoyed nature...

Giant leopard moth caterpillar (closely related to the woolly worm)

awesome sunsets

and the spectacular fall foliage here in PA

 

[pomonamissel]

hey i found this trunk at ken's . itys an old car trunk from the 30's , it would look great behind a bucket on a hotrod .

 

[Toolmanmike]

I organized some parts and boxed and sent a bead hone to a member in NY. I did measure a flywheel for another member but it is a 10.5 for a slant 6.

 

[JimmyRich]

View attachment 267527 Rainy day here in the hood, so Im in the garage getting a new floor shifter installed. What have the rest of you got going on??

 

[Jack-Stand]

Still wiring the car up. Had to figure out a way to keep the switched 12V+ signal line live while cranking, so I wired a couple diodes between the “start” and “run” wires on the ignition switch to feed my relay.

 

[HWYCRZR]

Since my car is up on the lift and put away for the winter, I started a re-upholstery project.
My wife found a chair on Facebook for $20 that she couldn’t pass up. After we got it home she decided it looked too ‘70s and smelled like cigarette factory. So $50 in materials and about 10 hours I recovered it. The foam scallops were the most difficult. I guess it turned out ok.
Starting pictures. I guess I didn’t take a full shot.

process and finished pictures.

 

[Polara_500]

Yard clean up, this is the last trailer of 7 or 8 and contains pretty much the last treemains from the tornado that went through abt 5 years back.