70 fury console

Bill fury

Member
Joined
May 27, 2018
Messages
113
Reaction score
74
Location
Staten Island ny
Like to convert my Fury to a floor shift. I have everything except the shifter, and linkage. Can i buy 70 b body linkage,and shifter since it will be easier to find. Thanks.
 
Like to convert my Fury to a floor shift. I have everything except the shifter, and linkage. Can i buy 70 b body linkage,and shifter since it will be easier to find. Thanks.
Look in the interior parts for sale. There's a whole set up.
 
There was a thread a while back comparing the B-body shifter and the C-body console shifter. The look similar, but the C-body item is a bit longer, as I recall. Not sure if the unseen parts migh be close enough to work, though?

CBODY67
 
Can't see the rods being the same. You can use a b&m cable though with a b body shifter. I used a cable because the a500 is too big around for the oem stuff to work
 
There was a thread a while back comparing the B-body shifter and the C-body console shifter. The look similar, but the C-body item is a bit longer, as I recall. Not sure if the unseen parts migh be close enough to work, though?

CBODY67
Thanks
 
Can't see the rods being the same. You can use a b&m cable though with a b body shifter. I used a cable because the a500 is too big around for the oem stuff to work
I was thinking about doing it that way if i couldn't find a set up. Thanks
 
Luckily the detents in the shifter were the same as a b&m shifter so it lined up without having to make a custom lever at the trans
 
Back
Top