For Sale RB Valley Plate

Status
Not open for further replies.

oldkimmer

Active Member
Joined
Oct 30, 2019
Messages
319
Reaction score
122
Location
Kindersley Saskatchewan Canada
Feedback: 1 / 0 / 0
Contact seller
Fabricated, but no idea who made it. Came off my 526 Indy Maxx Wedge. Had Indy SR heads on it. It is lowered approximately 2 inches in the center so u can use a dual plane intake. Had a 6 pac set up on it. $150.00 usd shipped in Canada or the lower 48.

CB62E305-31D9-4806-902E-E361093C19CB.jpeg


E37E8574-112A-4886-A818-643A34208B5E.jpeg


5543294E-9B75-458A-BF8D-879C53B449B4.jpeg


031A97A7-6DC6-4D98-8F75-17EF72EDF5B3.jpeg
 
That’s pretty cool Kim. What is it made out of and how much does it weigh?

Also wonder why a drop valley plate would be needed to run a dual plane intake. Factory intakes were dual plan and used regular valley pan.

just curious. Something particular to the Max wedge?
 
That’s pretty cool Kim. What is it made out of and how much does it weigh?

Also wonder why a drop valley plate would be needed to run a dual plane intake. Factory intakes were dual plan and used regular valley pan.

just curious. Something particular to the Max wedge?
It needs the dip because the dual plane intakes are not flat on the bottom. The factory bath tub hangs way down for the dual planes to clear. The 526 is a Indy Maxx aluminum wedge block, not a Max Wedge Chrysler iron bock. I’m not sure but it is 1/4 inch thick and about 8 pounds. Kim
 
Status
Not open for further replies.
Back
Top