SOLD 360 C body oil pan

Status
Not open for further replies.
"The 273, 318 and 340 use the same pan, the 360 has its own because the rear seal OD size is different."

I am planning a Magnum swap for wagon, need a 360 c body pan.
 
Yeah,, but which is which??? Give me the outer measurement for a 360 rear seal, measured on an empty pan.
 
All my small block shtuff has been ignored for years and I've lost track of what came from what. I am sure there's a pan from a 70 Polara 360, just have to figure out which one it is. I'll try get out and look.


It is a center sump, isn't it?
 
Last edited:
All my small block shtuff has been ignored for years and I've lost track of what came from what. I am sure there's a pan from a 70 Polara 360, just have to figure out which one it is. I'll try get out and look.


It is a center sump, isn't it?
Yep.
 
The way to tell a 360 pan from 263/318/340 is that on the rear of the pan it has a raised rib where the end seal fits. I don’t have a pic handy to show u. But both ends on the 273/318/340 pans are perfectly flat. Kim
 
Status
Not open for further replies.
Back
Top