WANTED Looking for these "screws" - to fix hood scoops

Status
Not open for further replies.

Stagepirat

New Member
Joined
Jun 10, 2018
Messages
20
Reaction score
1
Location
Munich / Germany
Feedback: 0 / 0 / 0
Contact seller
Hello.
I'm looking for these "screws". They look very special to me. To be honest I never saw them before. Does anyone of you have an idea where I could get those, or at least how they are called.
Greetings and than you
Axel

IMG_5268.jpg


IMG_5269.jpg


IMG_5271.jpg


IMG_5272.jpg


IMG_5273.jpg
 
Sorry just saw Germany. I think they are wood studs.

STUDS-2.jpg
Studs designed to be attached by (from left to right): Screwing into wood, bonding into composite and swaging into sheet metal.
 
If anyone is parting a 69-72 Chrysler I think the studs that go in the rear quarter extensions are what you need. Those are made to go in plastic or fiberglass. The 70 New Yorker I parted out had plastic extensions with those same studs.
 
If anyone is parting a 69-72 Chrysler I think the studs that go in the rear quarter extensions are what you need. Those are made to go in plastic or fiberglass. The 70 New Yorker I parted out had plastic extensions with those same studs.
I am not an expert, but I am sure Chrysler used them often when they had a fibeglass part that need to be attached to sheet metal. MY 78 NYer has those holding the front extension to the fenders. Darn thing rust up, and it generally unsrews from the fiberglass.
 
If anyone is parting a 69-72 Chrysler I think the studs that go in the rear quarter extensions are what you need. Those are made to go in plastic or fiberglass. The 70 New Yorker I parted out had plastic extensions with those same studs.
70-71 Polara fender extensions as well.
 
Status
Not open for further replies.
Back
Top