Cags70PolaraConvert
Active Member
- Joined
- Feb 24, 2012
- Messages
- 383
- Reaction score
- 231
So a few months ago I had a new top installed. After letting it stretch as recommended and now that we have experienced some warmer weather I have taken the top down a few times, which goes without issue. But the top now raises quite slowly, struggling, which it didn't do before the new top. Could this be a result of increased friction\pressure at the hinges due to the new top and needs lubricating or could the motor just be failing after all this time? I replaced the cylinders and lines a few years ago and filled the motor with transmission fluid according to the FSM instructions. Any low lying issues to look at before getting a new motor and installing it? Thanks for any suggestions.
I thought there was a similar thread on here not long ago but I was not able to find it.
I thought there was a similar thread on here not long ago but I was not able to find it.