CBODY67 replied to the thread Control Arm Bushings: Polyurethane or Rubber.

From the start of the "poly craze", promoted by magazines with advertisers of such (it seems), after consideration, I came up with a...

James Romano replied to the thread Replacing the Sway Bar Bushings.

I got the cheaper set from RareParts.com... don't bother. They don't fit. They're not made for a 7/8" bar. I tried to fit it on my...

James Romano attached a file to the thread WANTED 65 C-Body Washer Nozzels. Driver and Passenger set.

Got 'em... Thanks a mil fellas! Very satisfied, and I have an extra just in case one breaks. All back to factory look...compared to...

live4theking replied to the thread Welcome tommy to FCBO!.

Welcome from the Keystone State.

78Brougham replied to the thread Can’t get an alternator to put out a charge.

For one thing you need to get a decent Digital Volt Meter and not just use the "el cheapo" one under the dash. You may have wiring...

saylor replied to the thread Can’t get an alternator to put out a charge.

i didnt run the lights when i was doing that bit of test. i only ran the lights when i put FLD to BATT stud on alternator, which did not...

Newport 66 posted a new thread.

WANTED '62 300 Map light switch (with knob)

As the heading states...... [ATTACH]

Forum: Mopar Parts Wanted

Newport 66 replied to the thread Welcome tommy to FCBO!.

Welcome from Wisconsin

Wildbunch02 replied to the thread Welcome tommy to FCBO!.

Welcome from Long Island

LocuMob replied to the thread Greensboro Classic Car Auction Nov 2019.

No, but I've always loved those years and that paint style, always thought they were cool from the factory.

Davea Lux replied to the thread Starting issue(thinking distributor) PICS*.

Coil is not normally active in the accessory position, just start and run. Coil should get battery voltage in start and something close...

'69FuryIIIConvertible attached a file to the thread 1969 Sport Fury.

Thanks to @Mike66Chryslers for the introduction, I was able to pick up a 66 383 shortblock. [ATTACH] [ATTACH]

Drew-Pritchett replied to the thread Starting issue(thinking distributor) PICS*.

Thanks Dave, and as far as the coil showing only 3.6v with the key turned to accessories, is that too low? Shouldn't it show near the...