Search results for query: *

How much?

One side I replaced the hose and caliper. Does not release. When I install pads. You can turn. When I pumped the brakes to get the air out. The calipers are really tight can't turn rotor. You think I got a defective caliber? Should I tryva different brand?

How did you fix problem?

Are Raybestos calibers any good?

When I remove the caliper the rotor spins freely. You think it still can be the caliper? It is remanufactured by Cardon.

Anyone know what size the end fittings are for the driver side brake line?

I am going to try to replace a brake line and maybe get another caliper. Thanks for advise

No, opening the bleeder does not help.i disconnected the line at the master cylinder still not releasing. Think the new caliper is defective?

I replaced the hose . You think maybe the brake line?

Did you have the same problem before?

But shouldn't it release if loosen air bleed screw? What brand do you recommend?

Yes

Yes.

If I remove the caliber and and push the piston back in manually and reinstall caliber with pad it turns.

The car has been sitting for many years. I have drove the car before the lockup. Seems to drive ok. Would hear a hiss sound once in awhile. I bought new tires for it. So when I removed the front tires I noticed that the wheels would not turn when jacked up. I removed the wheels and could not...

I want to try to replace the brake line. Anyone know the size?

The front wheels would not turn. Thought was the caliper or rubber hose but same problem

I changed one and does the same as other. I am thinking that it may be the breaker booster? Anyway to test or release air?

I opened the bleeder screw and the new caliper does not release. Both front calibers same problem. WASHINGTON, MI AREA