Search results

  1. Bayoulee

    Its been a long time coming-

    Ive had this 1966 Sport Fury for 9 or 10 years. Its sat in the shop for the past 5-6. Finally found a 440 and had it built. Promax heads, mild Melling cam flat top pistons.
  2. Bayoulee

    WANTED 440 Intake Manifold - Part # 3512502; Cast # 3512501

    Ok i’ll check but sure it was from a ‘75 new yorker
  3. Bayoulee

    WANTED 440 Intake Manifold - Part # 3512502; Cast # 3512501

    I have a factory intake but would have to check do you know the years?
  4. Bayoulee

    440 build and distributor/HEI question

    Is this one ready to run? I dont know much about HEI
  5. Bayoulee

    440 build and distributor/HEI question

    I actually just found it- I see they have it for the 440 as well. thanks
  6. Bayoulee

    440 build and distributor/HEI question

    Which distributor was it that you used, and what else did you have to order to go with it? I'm really not familiar with the HEI.
  7. Bayoulee

    440 build and distributor/HEI question

    exactly. I didnt think about it when we ordered them.
  8. Bayoulee

    440 build and distributor/HEI question

    I am looking for an HEI ignition to add to the 440. I ordered the ready to run billet kit from Competition Products for $206 but found that it wont work with fabricated valve covers. I attached a couple of pictures of where he is with the build, and so you can see the valve covers. Any...
  9. Bayoulee

    Carburetor Question

    I lied that cam above wasnt available. I ended up getting The Melling MTD-2 is a 1200-4700
  10. Bayoulee

    Carburetor Question

    This is the cam: i called it mild,
  11. Bayoulee

    Carburetor Question

    My builder also recommended the AVS in 800cfm. To clarify, its going to be a street rod cruiser not a dragster. Wanted it to run good on pump gas. If i go with the AVS, how does one know how a 670 would perform next to the 800?
  12. Bayoulee

    Carburetor Question

    Thanks, definitely looking for nice street performance. Appreciate it
  13. Bayoulee

    Carburetor Question

    Btw these were the Only ones i could find in the 800-850cfm range.
  14. Bayoulee

    Carburetor Question

    Having a 440 built. Bored.30 Promax heads, mild Melling cam. Looking at carbs and wanted some expert advice. Here are the two i have been looking at: Suggestions or other options? Thanks-
  15. Bayoulee

    440 Headers

    i ordered a set of the TTI ceramic coated headers.$1200 shipped. We will see.
  16. Bayoulee

    440 Headers

    Heres the ad.
  17. Bayoulee

    440 Headers

    I found some HP manifolds on craigslist but they are a ways away and one had been patched. Also werent off a cbody. Thoughts?
  18. Bayoulee

    440 Headers

    Header shopping, and the only place I have had a response so far is Chrysler Power for the TTI headers. Ceramic coated with shipping is around $1100. Any other suggestions or any feedback on these guys? Thanks-
  19. Bayoulee

    Crankshaft Balance on 440

    I had a guy telling me that some 440s were internal vs external balanced. My builder is a 1975, and the transmission I was going to use is I believe a 1967. He said while some would bolt together, there would be terrible vibration. Any input on this? thank you
Top