Search results

  1. Knebel

    Broken flexplate or convertor?

    My Fury has started with a decent rattle sound at idle that has been getting a little more consistent today after some WOT tests from stop in a parkinglot.. I have had some starter kickbacks after installing a multispark and it now makes the same rattle sound when cranking. Happens more in N and...
  2. Knebel

    Electric fan recommendations?

    Hello, I am running a 360 with and EFI system that runs timing control too. I have a spal 2000cfm fan and Never really had a temp issue. I added an AC last winter and today was my first real day using it in 95° weater. No temp creep or heating up while driving, stays close to 200° but when I...
  3. Knebel

    Disc brake booster question

    I just finished my 4 wheel disc install and just adjusted the prop valve to the rear as good as I could. I started with it being about half way and then slowly gave the rears more pressure. So far it can really put your face in the dash when stepping on it! What a massive improvement over the...
  4. Knebel

    Master Cylinder for Disc/Disc conversion?

    What kind of master cylinder would I need for a disc setup front and rear? Will I need a residual pressure valve for the rear and a proportioning valve too? I have manual drums and will keep it manual just with discs all around. Got a very good deal where the rear brake was essentially free...
  5. Knebel

    Brake Pedal Ratio?

    I have an odd thing here. I have a 68 fury iii with manual drums all around. I contacted wilwood in regards to their disc brakes and master cylinders and got a questionaire back asking to measure the pedal ratio. I did that roughly as good as I could in the car and get a ratio of 4.5:1 This...
  6. Knebel

    Lower control arm bushing size?

    Is there Anyone who's got access to those lower control arm bushings and could give me some measurements? I would need the ID of the inner hole for the pivot pin (or the od of the pivot pin that goes into the bushing. ID of the outer metal sleeve and leght of the bushing. Looking to have some...
  7. Knebel

    Smallblock headers

    Is anyone aware of smallblock headers for a c body?
  8. Knebel

    For Sale 68 Fury III instrument cluster

    I have for sale an instrument cluster from my 68 fury. The clock does not work/worked intermittenly. $200 obo plus shipping See pics.
  9. Knebel

    Emergency Flasher question

    I have just installed my custom gauges and I have an issue with my Hazards. Its all wired pretty simply, all gauges and gauge lights share the same ground and power. Then I have a led for brights (which works just fine). And an LED for the parking brake. This one is seperate power and ground...
  10. Knebel

    For Sale Pertronix flamethrower Coil

    Not using this one anymore and its just been sitting on the shelf. 30$ plus shipping! SOLD!
  11. Knebel

    For Sale Adjustable voltage regulator

    Adjustable voltage regulator, works fine! 20 plus shipping
  12. Knebel

    For Sale SB dizzy RTR Hei

    I cleaned out my trunk and have this HEI distributor for sale. I dont remember what brand it was but it is for a Small Block. The distributer has maybe 100miles on it. Selling with two caps and two rotors. On one of the caps the center pin came loose from the spring. Used this for my EFI...
  13. Knebel

    Black friday Scams....

    Just something I saw... the 3 packs are the black friday deals.
  14. Knebel

    Rear ride height 68 Fury

    How do I find out what the std ride height is and how do I measure the ride hight in the rear accurately? I am looking at leafsprings and can choose std lower/higher...I just have no clue what to choose so my car wont look all jacked up high in the back!? I would like to maintain where its at...
  15. Knebel

    First Date

    There is a movie on Netflix called 'first date'. It's about a kid that wanted a car to pick a girl up for a date, he got scammed into buying a 65 new Yorker and he's driving around getting in all kinds of trouble with some robbers. Action Comedy centered around the car.
  16. Knebel

    WANTED Dash Bezel 68 Fury III AC

    Looking for a dash bezel like in the pic. Needs to be for AC car. Gonna be for a project, does not need to be pretty but in ok shape and cheap lol
  17. Knebel

    Headlight adjustment question

    I have recently upgraded my headlights from sealed beam to halogen with LEDs. I have one of those oldschool bubblelevel adjuster and I think I got them pretty close. According to the pics, would you say I need to move the passanger beam over to the right a little? Also, unsure about the...
  18. Knebel

    Expierience with Magnum force?

    I am looking at their tubular control arms. They are about $350 in the raw and I am wondering if anyone has expierience with their parts? I have read mixed reviews about them but all of them were like 'i had a friend who had a friends whos this and that broke'. Anyone used them?
  19. Knebel

    Bulging Alu Radiator Tank!!!

    I discovered this a few weeks back. Car runs fine, does not overheat at all. Fan cools it down quick from 210 to 200. I have replaced the cap thinking that could be the problem. Should I be concerned much or is it just poor china construction? Could be that I had filled the radiator too much?
  20. Knebel

    For Sale SB HEI Distributor

    I cleaned out my trunk and have this HEI distributor for sale. I dont remember what brand it was but it is for a Small Block. The distributer has maybe 100miles on it. Selling with two caps and two rotors. On one of the caps the center pin came loose from the spring. Used this for my EFI...
Top