Search results

  1. R

    1966 Chrysler 300 Rag Joint

    I got it off, but the short rod that goes into a small rectangular metal box came out. Does it just sit in this box and not connected? It has two metal pieces at the end that goes inside the box. Also, a small spring broke that was through one of the bolt holes in the rag joint. What is that...
  2. R

    Can you rebuild my 1963 Imperial headlight switch? All lights work except for the map light...

    Can you rebuild my 1963 Imperial headlight switch? All lights work except for the map light. Also, I can't find the backup switch in back of the reverse pushbutton. Can you tell me what it looks like? Thanks!
  3. R

    1963 Imperial Headlight Switch/Back Up Light

    How do I get ahold of him? This website says I have reached my limit of private conversations>
  4. R

    1963 Imperial Headlight Switch/Back Up Light

    I got the headlight switch out. Who works on those switches? I can't find the backup light switch. No power at the light bulb even with a direct ground from the battery, so it must be the switch.
  5. R

    1966 Chrysler 300 Rag Joint

    Yes, they are out.
  6. R

    1966 Chrysler 300 Rag Joint

    1966 Chrysler 300: Can't get the 4 screws loose to remove the rag joint. Do two consist of nuts that will come off or are they welded on? They require an allen wrench, which makes it very difficult to work with. Are the brackets threaded? Can I cut the joint in half, cut the bolts off...
  7. R

    1963 Imperial Headlight Switch/Back Up Light

    1963 Imperial - two issues: The dome light does not come on with the headlight switch. The dome light works ok with rear doors and switch on the upper left side of driver's door. Service Manual says to remove the retainer in the back of the switch. I can't see/find any retainer. Backup...
  8. R

    Block Exhaust Cross Over on 413 Engine

    I found some on Summit. Which size would I need for my 413 engine, .375, 5/8, or 1 inch diameter?
  9. R

    Block Exhaust Cross Over on 413 Engine

    Where did you purchase the sheathing insulation for the fuel line? Did you cover from the filter to the carb?
  10. R

    Block Exhaust Cross Over on 413 Engine

    1963 413 Engine on Imperial: I have the intake manifold removed from engine. Before installing I some questions. There is a lot of information about blocking off the exhaust cross over to help prevent vapor lock. Fel-Pro 1215 is a metal pan gasket with the ports blocked, but you have to add...
  11. R

    WANTED 1966 Chrysler 300 Windshield Washer Bottle

    Where can I purchase a 1966 Chrysler 300 windshield washer bottle that is reasonably prices? I found one at $75.00, which is more than I wanted to spend on a plastic bottle. Thanks!
  12. R

    1966 Chrysler 300 Master Cylinder

    How much do you want for the 1966 master cylinder for disc brakes?
  13. R

    WANTED 68 Newport windshield wanted

    I might have one but I am in Illinois. Let me know if you are interested.
  14. R

    WANTED Rear vent switch for '67 Newport

    I have a 1967 Newport parts car that had a rear vent. Are there screws on the back of the switch that come out? I will wait to see if you still need it before I try to take mine out. Let me know. Thanks!
  15. R

    1966 Chrysler 300 Master Cylinder

    My 300 has front disc brakes. The master cylinder has a thick lid. Cars in this vintage with drum brakes had a thin medal lid on the master cylinder. Is the thick lid because of disc brakes?
  16. R

    1966 Chrysler 300 Master Cylinder

    My 1966 Chrysler 300 has front disc brakes. The lid for the master cylinder is tall compared to other master cylinders with drum brakes that have just a thin metal lid. Is the tall lid because of front disc brakes?
  17. R

    For Sale 1968 Chrysler 300 4 door parts car

    I have a clean title. Parts car only as one rear spring has went through the trunk floor.
  18. R

    WANTED 1966 Chrysler 300 Air Cleaner Decal

    Does anyone have a good 1966 Chrysler 300 air cleaner decal that is round and says Chrysler on top and TNT 440 on the bottom? Thanks!
  19. R

    Paint Under Vinyl Top

    Thanks for your advice. Where do you purchase Picklex 20?
  20. R

    1966 Chrysler Trunk Liner

    What vendor sells the rubber liner for a 1966 Chrysler 300? A generic liner would probably work if I could cut it to fit. Thanks!
Top